What is the best volume pedal? I'm shopping.

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

User avatar
Paul Fry
Posts: 91
Joined: 6 May 2007 6:40 pm
Location: Frankfort, Indiana, USA

What is the best volume pedal? I'm shopping.

Post by Paul Fry »

I need input (Pros & cons all welcome) about which pedal to buy. I know in recent years the technology has come along way. Thanks for your input in advamce!
Setup; MSA S12, POD XT, Hilton, Peavey Session 500, Mackie SM450's
User avatar
Steve Hitsman
Posts: 2039
Joined: 25 Mar 1999 1:01 am
Location: Waterloo, IL

Post by Steve Hitsman »

You know what they say about opinions...

I'm going to jump in early and hope to make it simple. I would consider only three: Goodrich pot pedal, Hilton and Telonics. They're all fine. Price is a huge consideration. Finding reliable pots for the Goodrich can be a problem but it is the most affordable. Telonics is the most technologically advanced and most expensive. I use a Hilton and am totally satisfied.
User avatar
mtulbert
Posts: 1452
Joined: 14 Apr 2000 12:01 am
Location: Plano, Texas 75023

Post by mtulbert »

Telonics and Hilton seem to be the odds on favorites.

I have one of each and they are both good, but the Telonics for me holds the edge at the moment.
Mark T


Rittenberry Laquer D10, Rittenberry Prestige SD10, Revelation Preamp,Revelation Octal Preamp,Lexicon PCM 92 Reverb, Furlong Cabinet
User avatar
Chris Dorch
Posts: 489
Joined: 15 Feb 2010 3:55 pm
Location: Wisconsin, USA

Post by Chris Dorch »

I don't know if it's the best, but I use a Hilton...
User avatar
CrowBear Schmitt
Posts: 11624
Joined: 8 Apr 2000 12:01 am
Location: Ariege, - PairO'knees, - France
Contact:

Post by CrowBear Schmitt »

i've had the 3, Goodrich 120, Hilton, & Telonics
all are good & do the job well
as most of us know, budget's the boss

as mentioned telonics is the most advanced & the most expensive
it's 6 vps in 1 & setting point 0 / taper is a breeze
that's the one 1 moved up too & i'm quite content
User avatar
Andy Zahnd
Posts: 401
Joined: 30 Dec 2002 1:01 am
Location: Switzerland
Contact:

Post by Andy Zahnd »

I agree with Coewbear... budget is the boss...
but Teletonic is the way outstanding! But it has the price! :D
User avatar
john widgren
Posts: 2623
Joined: 24 Nov 1998 1:01 am
Location: Wilton CT

Telonics VP

Post by john widgren »

For me, it's Telonics. I sell em, but I'd use and recommend them even if I didn't. Not cheap, but absolutely worth every dime.
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com
Ron Ross
Posts: 92
Joined: 17 Jul 2010 7:11 am
Location: Midwest City,Oklahoma

Post by Ron Ross »

another vote for telonics...a bit pricey but worth every penny
"Kick'er off there Wichita"
User avatar
Paul Fry
Posts: 91
Joined: 6 May 2007 6:40 pm
Location: Frankfort, Indiana, USA

Post by Paul Fry »

It sounds like the general consensus is Telonics for performance...which is what I'm interested in. Is it the FP-100? Since I'm sure those of you that have it, you already shopped and were satisfied you got the best deal. Please PM me and let me know where you got yours & what your cost was, if you would. Thanks.
Setup; MSA S12, POD XT, Hilton, Peavey Session 500, Mackie SM450's
Billy Easton
Posts: 2107
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Billy Easton »

Hands down, it's Telonics for me. I have used one for a year, and am completely satisfied!!

Billy Easton
Las Vegas, NV
Billy & Meriul Easton
Nashville, TN
Stephen Cordingley
Posts: 114
Joined: 17 Jun 2010 4:20 pm
Location: Ontario, Canada

Post by Stephen Cordingley »

not to muddy the waters, but...

I only know the Hilton and Goodrich
The Hilton seems (a little) clearer and brighter, which makes me think it has a flatter response or doesn't tame the highs quite as much ... but when I go back to the Goodrich after using the Hilton for a while, the Goodrich sounds pleasantly coloured/restrained ... so maybe you have to ask yourself, "do I want totally flat response, (ie. the real sound of my particular steel), or do I want a 'classic steel sound?'" The Goodrich's sonic limitations may be part of its charm...
Harry Dove
Posts: 289
Joined: 5 Sep 1998 12:01 am
Location: Michigan, USA

Post by Harry Dove »

I also found when I went back to the Goodrich that I liked the sound better. Changing pots can be a pain though. Just comes down to personal taste I guess.
User avatar
Paddy Long
Posts: 5462
Joined: 19 Aug 2003 12:01 am
Location: Christchurch, New Zealand

Post by Paddy Long »

If you want the "best" as you say then Telonics by a country mile -- and it is upgradeable via USB !
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
User avatar
Cliff Kane
Posts: 1932
Joined: 10 Dec 1999 1:01 am
Location: the late great golden state
Contact:

Post by Cliff Kane »

This has all been said many times before. As great as the Telonic and the Hilton pedals are, the venerable Goodrich 120 is the best as well. There is less circuitry inside of the pedal that could fail, it does not need electricity to work, with the right pot it sounds great, it lasts for ever, and it's relatively inexpensive. People complain about having to change pots, but I put the Dunlop pots in my two 120's over two years ago and both still sound great. If a 120 ever does need to be repaired or have the pot or string changed you can easily do it yourself in a matter of minutes. All of the steel guitar masters and their recordings used pot pedals for decades. Analog pot pedals sound different from active electronic and digital pedals, and a lot of people prefer the sound of the pot and the high end roll off that happens as the pot is rolled off, or, conversely, the high end boost that happens when the pot is opened up. I used a Goodrich Matchbox and a Goodrich 120 pedal for a long time and liked it, but I found the Matchbox to be a little hard sounding. Now I use a Sarno FreeLoader with a Goodrich 120 with the Dunlop pot and I am very happy with the tone with my Emmons single coils going into my Fender amp or my Peavey amp.
Mike Christensen
Posts: 393
Joined: 11 Apr 2005 12:01 am
Location: Cook Minnesota

Post by Mike Christensen »

I have been watching this forum for quite a few years now and have noticed how things come and go. It wasn't that long ago that all you heard about was the Hilton. Now its the Telonics. Both quite spendy! I would wager that in time that too will be replaced with something else and through all of them the Goodrich or even the Sho-Bud will still be in the top three. Just my two cents. Happy shopping!!!
User avatar
Lee Baucum
Posts: 10326
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

I agree with Cliff. A Goodrich 120, with one of Tom Bradshaw's Dunlop pots, into a Sarno FreeLoader does it for me.
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
Storm Rosson
Posts: 1408
Joined: 1 Oct 2009 4:16 pm
Location: Silver City, NM. USA

Post by Storm Rosson »

:) I haven't tried a Telonics, but my Hilton is my fav so far. ;-)
Storm Rosson
Posts: 1408
Joined: 1 Oct 2009 4:16 pm
Location: Silver City, NM. USA

Post by Storm Rosson »

:) Hmmmm that's a pretty good plan imo George, hmmmmmmm....Stormy 8)
Paul E. Brennan
Posts: 237
Joined: 27 Jun 2008 7:46 pm
Location: Dublin, Ireland
Contact:

Post by Paul E. Brennan »

I tried the Hilton for a while. It is very good but I found the sound a bit harsh and "brittle" after a while. This eventually got to be very annoying. I went back to my old Goodrich and it was like slipping on an old comfortable pair of shoes - warm and comforting. I also use a little buffer amp plugged directly into the steel. It's called a LoZ and is/was made in Japan. I'm not sure if they're still available but it's just a very simple op-amp with unity gain.
User avatar
Frank Bradley
Posts: 62
Joined: 27 Feb 2009 2:53 pm
Location: Seaford, Delaware

Post by Frank Bradley »

I agree... a nice "Goodrich" is tough to beat. Have one going on 30+ years and just one pot replacement. Smooth and sounds great.
Vintage BMI D-10/8-7, Goodrich 6122 pedal, Fender Twin Reverb.
User avatar
mike nolan
Posts: 1255
Joined: 10 May 2000 12:01 am
Location: Forest Hills, NY USA
Contact:

Post by mike nolan »

Pot pedals, 'cause I like the sound.....
Gerald Menke
Posts: 850
Joined: 24 Jul 2001 12:01 am
Location: Brooklyn, NY, USA

Post by Gerald Menke »

I have to say I have gone back to using a pot pedal and have never been happier with my tone. I was an early convert to the Hilton and keep one in my Steeler's Choice seat for a backup, and also have a few Goodrich LDRs that I use at home, but my favorite tone is definitely my old Emmons through the extremely cool and rather rare Franklin double pot pedal. I would love to find a backup for it. After all, if Paul uses a pot pedal, what else needs to be said?

Hope I am not adding confusion, but I would definitely encourage anyone looking to get a new VP to play through a pot pedal too and A/B it with any of the non-pot pedals out there.

Just my .45 cents (adjusted for Federal Reserve-induced inflation)

Gerald
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

There was a time that a good pot was hard to find, now however Goodrich is installing pots that are guaranteed to be good for 1 million cycles. The Dunlop pots that Tom Bradshaw sells are quite good as well although a titch tougher to deal with due to the terminal types, flat spot on the shaft, and lack of slot in the end making it tougher to adjust easily. That being said- it is worth the effort in times that other good pots are scarce. The Hilton is also a very good pedal and a nice choice for an electronic pedal. The Telonics pedal is the top of the line in my opinion for many reasons and my most favorite attribute is the 6th selectable taper adding a 6db boost at the end of the throw allowing for much greater sustain on any instrument. The sales price of these pedals is tightly regulated so getting a discounted price is difficult and the margin is small as they are expensive to produce.
User avatar
Earnest Bovine
Posts: 8318
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA USA

Post by Earnest Bovine »

Jim Palenscar wrote: now .. Goodrich is installing pots that are guaranteed to be good for 1 million cycles.
Do you know what they are and where we can get them?
Post Reply