Show us your Rack !!!!!

Paddy Long · Post by **Paddy Long** » 12 Dec 2010 12:39 am

I recently decided to rejig my rack systems and needed to get a 5 space rack case - so since I already had a nice 4 space job from Fred Justice I called him and got him to ship a new one out to me in NZ.... This is an unadulterated plug for Fred's workmanship and practicality - these rack cases are perfectly designed 3-door cases - ideal for our needs, and the build quality is outstanding - Fred is a joy to do business with - nothing is a problem.

my first rack in 1995 was based around a Peavey DPC750 and Profex - I still have the DPC and it never misses a beat (unlike me).
I have them both wired with 2 x AC outlets and 2 x speaker outlets, Left wet, right dry. If I am in the studio or using my nashville 1000, I switch off the power amp and run direct out of the AC wet to my NV1000, or both to the desk. Very flexible system. I also use 2 x Peavey Nashville E115 cabinets with 1501-4's.

Here are some pics of the 2 racks in their current configuration - I have a spare slot for a Telonics Stereo power amp (soon !!). Both racks also have a power supply for my Telonics volume pedals mounted in the power strip - nice and handy.

Under the skirt !

Easy access 3rd door !

CrowBear Schmitt · Post by **CrowBear Schmitt** » 12 Dec 2010 6:19 am

Ken Metcalf · Post by **Ken Metcalf** » 12 Dec 2010 6:39 am

Justice rack here Thanks Fred

Michael Robertson · Post by **Michael Robertson** » 12 Dec 2010 9:40 am

Dang fellas you’re walking in some tall cotton.
That’s some serious looking gear.
How do you setup your entire rig, cabs and all?
California Dreamin

Matthew Prouty · Post by **Matthew Prouty** » 12 Dec 2010 9:45 am

Wow Paddy! You got that fast. I was just over at Fred's shop and that was on the bench.

All I got to say is those are some nice racks! (at least I won't get my teeth knocked out for saying that here.)

m.

Chris Lucker · Post by **Chris Lucker** » 12 Dec 2010 10:42 am

Throw me some beads first.

Gary Lee Gimble · Post by **Gary Lee Gimble** » 12 Dec 2010 12:51 pm

my rack

Charles Kurck · Post by **Charles Kurck** » 12 Dec 2010 1:33 pm

Retro Rack

Paddy Long · Post by **Paddy Long** » 12 Dec 2010 2:07 pm

Hi Matt yes it only took about 5 or 6 days to get here via USPS - not a cheap delivery option but it arrived without a mark on it, and a lot quicker than I was expecting - Fred did a brilliant job.

Gary Lee - I love your rack mate hehe !!

So you Lexicon guys, what is the best unit to run with the Rev ?? I know there is a couple that aren't that compatible with the routing etc !!

Michael - I just sit my 2 Peavey 15" cabs on top of my steel case behind me!

Crowbear - how are you liking your Telonics power amp??

Pit Lenz · Post by **Pit Lenz** » 12 Dec 2010 4:01 pm

Hey Charles,
an old beer cooler box?

What a stylish piece of equipment!

Bill Rode · Post by **Bill Rode** » 12 Dec 2010 4:28 pm

Here is what mine looked like a few years back. I was using it for guitar/steel at the time. I now have it setup completely different so will have to find a current pic of it.

Mark van Allen · Post by **Mark van Allen** » 12 Dec 2010 5:05 pm

http://www.markvanallen.com/mygear.html

Darvin Willhoite · Post by **Darvin Willhoite** » 12 Dec 2010 7:28 pm

I go for a simpler approach. I couldn't find what I wanted, so I made my own to match my pack-a-seat. I use a Digitech 2112 for a preamp and effects. I also have a Shure wireless transmitter for my in ear monitors, and an Audio Technica wireless guitar system for when I play guitar or mandolin. I made a detachable mount for my Aviom monitor mixer on the end of the rack. It has two inputs on the end under the Aviom, and the power jack, XLR out, high impedance out, and wireless transmitter input on the other end. I use a Countryman phantom powered direct box which is mounted in the bottom of the rack. I put a vented plate in the bottom to let air in for the tube preamp.

Steve English · Post by **Steve English** » 12 Dec 2010 8:58 pm

Sarno Music Solutions Rack

Richard Sinkler · Post by **Richard Sinkler** » 12 Dec 2010 10:37 pm

Sorry...

Charles Kurck · Post by **Charles Kurck** » 13 Dec 2010 4:30 am

Pit;
I built the rack case from quater-sawn pine.

Barry Blackwood · Post by **Barry Blackwood** » 13 Dec 2010 7:58 am

Jamie Lennon · Post by **Jamie Lennon** » 13 Dec 2010 8:31 am

Heres mine

chas smith · Post by **chas smith** » 13 Dec 2010 12:52 pm

Paddy Long · Post by **Paddy Long** » 13 Dec 2010 2:19 pm

Great rig Chas - you must have a bigger truck than the rest of us too

Pit Lenz · Post by **Pit Lenz** » 13 Dec 2010 2:22 pm

You must have
ROADIES!

chas smith · Post by **chas smith** » 13 Dec 2010 7:36 pm

Paddy, my little economy car...

Paddy Long · Post by **Paddy Long** » 13 Dec 2010 7:38 pm

Ok Chas - slightly bigger than mine, I have a Toyota Surf (4-runner) 3 litre turbo diesel !

chas smith · Post by **chas smith** » 14 Dec 2010 10:35 am

Paddy, very nice. I wanted a diesel and I got talked out of it, not to mention that I couldn't afford one. So I settled for a V-10. I can slide a 4x8 sheet of plywood in the back and have carried 1500lbs of welding equipment and tools (day-job), or 1200lbs of musical equipment, short tour in the Bay area. The newest car I've owned, before the Excursion, was a 1975 Lincoln Mark V and before that, a '73 Coupe de Ville. I love looking out over a half acre of sheet metal.... cheers

Dickie Whitley · Post by **Dickie Whitley** » 14 Dec 2010 4:18 pm