Zums Only?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Zums Only?

Post by chris ivey »

has there been a zumsteel picture thread? i can't remember. i bought my '82 d10 new from bruce after just seeing his little square ad in steel guitarist magazine. then i drove to the townhouse in emeryville, ca to see one in person. joe goldmark had his set up there and it looked and sounded great! i knew one other guy who had an earlier model also.

i remember that franklins were pricey at the time and i couldn't get a satisfactory response at emmons so i took a chance on the zum. i have been totally pleased at my decision ever since.

show me your zum if you love it! i'm not looking for pics from all you salesmen who just have lots of steels going through your hands to make money.


Image



Image
User avatar
Bent Romnes
Posts: 5985
Joined: 28 Feb 2007 2:35 pm
Location: London,Ontario, Canada
Contact:

Post by Bent Romnes »

Chris, great pics for the Zum-thread. But under-the-skirt pics should be mandatory
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

i agree bent! i lost my old pics and can't get the upload thing happening lately.

action shots are ok, too.


Image
Mike Kowalik
Posts: 1752
Joined: 29 Nov 1998 1:01 am
Location: San Antonio,Texas

Post by Mike Kowalik »

"salesmen with lots of steels going through your hands to make money".....

Does this really happen here?

:lol:
Last edited by Mike Kowalik on 22 Nov 2010 2:12 pm, edited 1 time in total.
User avatar
bill dearmore
Posts: 663
Joined: 19 May 2000 12:01 am
Location: Belton,Tx.,USA

Post by bill dearmore »

Here's one that I've grown fond of...

Image
User avatar
Paddy Long
Posts: 5462
Joined: 19 Aug 2003 12:01 am
Location: Christchurch, New Zealand

Post by Paddy Long »

Well here's my 2 babies ... !!! :D 01 standard, 08 Hybrid

Image

Under the skirt of a 9 and 9.
Image

Image

Alooms on the Black standard guitar.

Image
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

this is wonderful...thanx...keep 'em coming....
i knew i could count on you, paddy!
User avatar
Bill Lowe
Posts: 2051
Joined: 25 Apr 2007 10:36 am
Location: Connecticut

Post by Bill Lowe »

Image

Image
User avatar
Colm Chomicky
Posts: 2476
Joined: 11 Mar 2003 1:01 am
Location: Kansas, (Prairie Village)
Contact:

Post by Colm Chomicky »

Here's one of mine. This photo was taken this Halloween in Harrisonville, Mo...not too far away from where this D-10 was born.


Image



Image
User avatar
Hook Moore
Posts: 4103
Joined: 4 Aug 1998 11:00 pm
Location: South Charleston,West Virginia

Post by Hook Moore »

I don't really have many pictures with this guitar yet. Its a Hybrid with 8 & 10 and Emmons single coil pickups.
Hook


Image
Last edited by Hook Moore on 9 Nov 2011 4:02 pm, edited 1 time in total.
User avatar
CrowBear Schmitt
Posts: 11624
Joined: 8 Apr 2000 12:01 am
Location: Ariege, - PairO'knees, - France
Contact:

Post by CrowBear Schmitt »

my 1st Zum - 1983(approx) 9/8 that was made for Mike Smith that i got off ebay
a great steel that made me appreciate the ZumSteel quality

yep ! that's Jim Loessberg pickin' on it on July 4 2004 when he was in France w: Pat James
Image

i ended up ordering a new from Bruce & got it on 2006 - 9/8 as well
here w: my son Enzo
Image
User avatar
Lynn Stafford
Posts: 2233
Joined: 17 Sep 2002 12:01 am
Location: Ridgefield, WA USA
Contact:

My ZumSteel Hybrid

Post by Lynn Stafford »

I'm the 6th proud owner of this great guitar that was originally built for the great Rick Price. It's the 3rd Hybrid that Bruce built, so it's a very early one. It's "zumwhat" unusual, in that it has the older 2 5/8" pedal spacing, rather than the newer 2 1/2" and it has Kluson style tuning keys as well as a tone circuit. Those variations from the norm were requested by Rick when he ordered the guitar to be built. I also understand the the maple cabinet was made from a 100 year old log!

Here is a photo of Rick Price playing this guitar while backing Darrell McCall. Rick and Dickey Overby are both featured on a Darrell McCall CD titled "Old Memories and Wine" with Rick playing this ZumSteel!

Image

Here are two photos taken by the person I bought the guitar from. It now has Emmons single coil pickups, which I prefer.

Image

Image

Here are a few photos of the under carriage.

Image

Image

Image

Here is a a photo of Bud Harger (2nd owner) playing this guitar. He bought the guitar from Rick (to play while he waited for an identical one to be built) afterwhich he sold it.
Image
Last edited by Lynn Stafford on 29 Nov 2010 7:55 pm, edited 1 time in total.
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

here's a great picture of some boys from bakersfield!

larry petree on steel and billy mize with the nice guitar. i swear i've heard both these names before.

Image


...darn, larry sent me this pic but i don't know how to change the size...

any suggestions? it's a great pic when it's large.
User avatar
Edward Efira
Posts: 425
Joined: 28 Jul 2003 12:01 am
Location: California, USA

Post by Edward Efira »

here is my beloved '06


Image
<small><b>'75 Sho-Bud 4&4, '01 Zumsteel 8&8, 2012 Zum Hybrid 4&6</b></small>
User avatar
Gary Lee Gimble
Posts: 2006
Joined: 19 Jul 1999 12:01 am
Location: Fredericksburg, VA.
Contact:

Post by Gary Lee Gimble »

From the executive suite
Image
the gig zum...

Image
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

this thread presents the 'classy' look of zumsteels.
something tells me that these guys aren't a bunch of beginners.

thanx for the pics...let's see more.

does anyone have any early zums...from the developmental era?
User avatar
T. C. Furlong
Posts: 1195
Joined: 24 Oct 2002 12:01 am
Location: Lake County, Illinois, USA
Contact:

Post by T. C. Furlong »

My Three Sons - Will, Joey and Zum - 11 knees between 'em :)
Image
TC
User avatar
Henry Matthews
Posts: 3974
Joined: 7 Mar 2002 1:01 am
Location: Texarkana, Ark USA

Post by Henry Matthews »

Here's mine:
Image
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

Post by Jack Goodson »

i have owned several zums over the years, but this is my favorite. 2000 year model....thanks jackImage
User avatar
Mark van Allen
Posts: 6378
Joined: 26 Sep 1999 12:01 am
Location: Watkinsville, Ga. USA
Contact:

Post by Mark van Allen »

Great guitars. I love mine.
Image
User avatar
Adair Torres
Posts: 456
Joined: 30 Sep 2008 12:48 pm
Location: Sao Paulo, Brazil
Contact:

Post by Adair Torres »

Here is mine Hybrid 2010
*


Image
Last edited by Adair Torres on 23 Dec 2010 2:03 pm, edited 1 time in total.
Adair Torres - Boss at TowerS Steel Guitars
__________________

Zum D10 8X7 Wineberry 2010.
Emmons SD10 3X8 Black 1994.
Derby D10 8X8 Rosewood 2008.
TowerS SD10 3X5 Imbuia Mica Finish 2018
User avatar
Bent Romnes
Posts: 5985
Joined: 28 Feb 2007 2:35 pm
Location: London,Ontario, Canada
Contact:

Post by Bent Romnes »

Hey Adair, How do you like your new Zum? Give us a little write-up on how you like the tone and mechanics compared to the other guitars you have played.
User avatar
Adair Torres
Posts: 456
Joined: 30 Sep 2008 12:48 pm
Location: Sao Paulo, Brazil
Contact:

Post by Adair Torres »

Hi Bent....
We'll have to wait until Christmas day when it arrives.
I'm very anxious, waiting 30 long days.
Adair Torres - Boss at TowerS Steel Guitars
__________________

Zum D10 8X7 Wineberry 2010.
Emmons SD10 3X8 Black 1994.
Derby D10 8X8 Rosewood 2008.
TowerS SD10 3X5 Imbuia Mica Finish 2018
Dennis Graves
Posts: 355
Joined: 14 Aug 2007 1:16 pm
Location: Maryville, Tennessee

Post by Dennis Graves »

Image
Charles Campbell
Posts: 249
Joined: 29 Aug 2008 2:43 pm
Location: Avon,Indiana, USA

My Favorite

Post by Charles Campbell »

Image
Post Reply