Top neck is all 3rds. There are no 4ths in it. Also there are no 6ths.chas smith wrote:To add to what Herb said, the top neck is ... and stacked 4ths.
Maurice Anderson's Bigsby
Moderator: Shoshanah Marohn
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
Ernest
I realize you were replying to Chas' post, but I was looking at the tuning from the perspective of chord voicings. You are correct, of course, that the tuning is a series of alternating major third and minor third intervals.
I realize you were replying to Chas' post, but I was looking at the tuning from the perspective of chord voicings. You are correct, of course, that the tuning is a series of alternating major third and minor third intervals.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
Yes, it's like the common B11 tuning : great if you want to play thirds, some sevenths with the seventh on top, ninths with the ninth on top. Lots of triads in root position. No triads in other inversions. If you play it a lot, I think you would use lots of slants to get major & minor sixths. It seems best suited to player who likes to fly back & forth between necks.
-
- Posts: 87
- Joined: 2 Feb 2005 1:01 am
- Location: Sand Springs, Oklahoma, USA
- chas smith
- Posts: 5043
- Joined: 28 Feb 2001 1:01 am
- Location: Encino, CA, USA
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Larry S....Your offering me the privilege of being reunited with my first Bigsby which had such an impact on my musical life, would bring back a flood of great memories. It was very thoughtful and kind of you to contact me and tell me you were the proud owner, and offer to allow me to play the guitar for an extended time.
Possibly we could get together early next year. I would appreciate the opportunity to display your Bigsby at the Texas Steel Guitar Convention in March. I'm sure all the players would appreciate seeing what is likely the most well cared for and original Bigsby in existence.
Possibly we could get together early next year. I would appreciate the opportunity to display your Bigsby at the Texas Steel Guitar Convention in March. I'm sure all the players would appreciate seeing what is likely the most well cared for and original Bigsby in existence.
-
- Posts: 87
- Joined: 2 Feb 2005 1:01 am
- Location: Sand Springs, Oklahoma, USA
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
- Jerry Hayes
- Posts: 7489
- Joined: 3 Mar 1999 1:01 am
- Location: Virginia Beach, Va.
Hey Reece, can you recall the tuning and pedal changes you had on the Bigsby S-10? That'd be great to see those! Was that guitar your first venture into the concept of a universal tuning? Thanks in advance..........JH in Va.
Last edited by Jerry Hayes on 30 Sep 2010 9:59 am, edited 1 time in total.
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Jerry H.....Thank you for the question. Please keep in mind, thats been a long time ago, but I believe this is the tuning and the setup I used.
1 2 3 4 5 6
A
F.....................-1/2
D......... -1 .......................-1/2 ....+ 1
Bb..................................................+ 1
G
F.....................-1/2
D......................................-1/2. ..................+1/2
Bb...................................................................................+1/2
G
Eb...................+1/2
IF memory serves correct, my 3rd string one tone lower on pedal 1 combined with the same string lowering 1/2 on pedal 3 was what Paul Bigsby originally said would not work correctly, but later achieved.
It was when I went to my first 12 string MSA that I started combining the new sounds of the E9th tuning, which became increasingly popular "after" I received my single 10 Bigsby.
When experimenting with getting the E9th sounds on the 6th tuning, I quickly noticed it was possible to start with the 9th tuning and then reverse it into the 6th tuning. The fact I was playing far more swing and jazz, explains why I stuck with the 6th going to the 9th rather than the reverse.
Thanks for the question............
1 2 3 4 5 6
A
F.....................-1/2
D......... -1 .......................-1/2 ....+ 1
Bb..................................................+ 1
G
F.....................-1/2
D......................................-1/2. ..................+1/2
Bb...................................................................................+1/2
G
Eb...................+1/2
IF memory serves correct, my 3rd string one tone lower on pedal 1 combined with the same string lowering 1/2 on pedal 3 was what Paul Bigsby originally said would not work correctly, but later achieved.
It was when I went to my first 12 string MSA that I started combining the new sounds of the E9th tuning, which became increasingly popular "after" I received my single 10 Bigsby.
When experimenting with getting the E9th sounds on the 6th tuning, I quickly noticed it was possible to start with the 9th tuning and then reverse it into the 6th tuning. The fact I was playing far more swing and jazz, explains why I stuck with the 6th going to the 9th rather than the reverse.
Thanks for the question............
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
-
- Posts: 3139
- Joined: 11 Aug 1999 12:01 am
- Location: Los Angeles, California USA
Reece
I have several questions you may have a chance to answer.
Do you remember how long the waiting list was for your 1956 T-8 and then again for your S-10?
Do you recall how many months ahead of delivery you were asked to provide your requested setup?
Also, did Bigsby offer the engined turned option to you for the 1956 guitar, and was it not available for the 1959 or 1960 S-10?
Did he offer a choice between a new guitar or a refurbished one?
How much choice did you have in graphics?
Thank you, I appreciate your sharing your experiences.
Chris
I have several questions you may have a chance to answer.
Do you remember how long the waiting list was for your 1956 T-8 and then again for your S-10?
Do you recall how many months ahead of delivery you were asked to provide your requested setup?
Also, did Bigsby offer the engined turned option to you for the 1956 guitar, and was it not available for the 1959 or 1960 S-10?
Did he offer a choice between a new guitar or a refurbished one?
How much choice did you have in graphics?
Thank you, I appreciate your sharing your experiences.
Chris
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars.
Red Bellies, Bigsbys and a lot of other guitars.
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Chris L.....I will address your questions in the order you asked.
1. The waiting time was scheduled for 4 years for my triple 8. However I received the guitar in about 3 years. I believe the deposit was $50.00 at the time.
2. The single 10 took about two years.
3. Paul did not offer me a choice of the swirled neck. In fact I was surprised when I got it, I don't think he used the swirls on many guitars. At the time I was also surprised because I had seen the raised frets in the neck casting on all Bigsby's before mine. I would be VERY interested in knowing if the spacing of the raised fret neck had the exact same distances between specific frets as I mentioned earlier in this thread.
5. Paul never mentioned an option for a refurbished guitar, and i've never heard he offered anything like that.
6. I expressed no preference on graphics, and was not asked.
Thank you for the questions.........
1. The waiting time was scheduled for 4 years for my triple 8. However I received the guitar in about 3 years. I believe the deposit was $50.00 at the time.
2. The single 10 took about two years.
3. Paul did not offer me a choice of the swirled neck. In fact I was surprised when I got it, I don't think he used the swirls on many guitars. At the time I was also surprised because I had seen the raised frets in the neck casting on all Bigsby's before mine. I would be VERY interested in knowing if the spacing of the raised fret neck had the exact same distances between specific frets as I mentioned earlier in this thread.
5. Paul never mentioned an option for a refurbished guitar, and i've never heard he offered anything like that.
6. I expressed no preference on graphics, and was not asked.
Thank you for the questions.........
-
- Posts: 3139
- Joined: 11 Aug 1999 12:01 am
- Location: Los Angeles, California USA
-
- Posts: 42
- Joined: 20 Dec 2002 1:01 am
- Location: Macon, Georgia, USA
ReeceReece Anderson wrote:1. The waiting time was scheduled for 4 years for my triple 8. However I received the guitar in about 3 years. I believe the deposit was $50.00 at the time.
That is very telling about the limited options of pedal steel purchase to players around at that time. I couldn't see many having the patience to wait 3 or 4 years for a guitar these days. Little wonder that Bigsby's have appreciated in value the way they have.
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Infinity SD10 (4+5) Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
- Stan Schober
- Posts: 611
- Joined: 19 Aug 2009 3:05 pm
- Location: Cahokia, Illinois, USA
Code: Select all
1 2 3 4 5 6
A
F -1/2
D -1 -1/2 + 1
Bb + 1
G
F -1/2
D -1/2 +1/2
Bb +1/2
G
Eb +1/2
-------------------------------
1 2 3 4 5 6
A
F E
D C Db E
Bb C
G
F E
D Db Eb
Bb C
G
Eb E
Emmons S-8 P/P,DeArmond 40. Slowly drifting back towards sanity.
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Ken B....There's no question the options were limited, but to tell you the truth, at the time that thought never occurred to me. I think people's mind sets in that era were a lot different than they are today. All I wanted was a Bigsby, and however it came, I thought that was the way it was supposed to be.
The wait was a long time, but to me and the relatively few others who owned Bigsby guitars, it was well worth it. Anyone who owned a Bigsby in that era was almost assured a playing job and "stood out" among steel players other musicians, and artists as well.
Stan S....I appreciate your taking the time to display my tuning correctly. Keep an eye on my posts because I'm sure I'll require your expertise again. This computer thingy can become mind boggling for me real fast.
The wait was a long time, but to me and the relatively few others who owned Bigsby guitars, it was well worth it. Anyone who owned a Bigsby in that era was almost assured a playing job and "stood out" among steel players other musicians, and artists as well.
Stan S....I appreciate your taking the time to display my tuning correctly. Keep an eye on my posts because I'm sure I'll require your expertise again. This computer thingy can become mind boggling for me real fast.
- Stan Schober
- Posts: 611
- Joined: 19 Aug 2009 3:05 pm
- Location: Cahokia, Illinois, USA
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
Are you sure that P4 raises strings 3 and 4? Raising 4 and 5 seems more likely (like early Alvino Rey and Bob White).Stan Schober wrote:[tab]
1 2 3 4 5 6
A
F -1/2
D -1 -1/2 + 1
Bb + 1
G
F -1/2
D -1/2 +1/2
Bb +1/2
G
Eb +1/2
-------------------------------
1 2 3 4 5 6
A
F E
D C Db E
Bb C
G
F E
D Db Eb
Bb C
G
Eb E[/tab]
Does that look correct, Reece ?
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
- Stan Schober
- Posts: 611
- Joined: 19 Aug 2009 3:05 pm
- Location: Cahokia, Illinois, USA
Code: Select all
1 2 3 4 5 6
A
F -1/2
D -1 -1/2
Bb + 1
G + 1
F -1/2
D -1/2 +1/2
Bb +1/2
G
Eb +1/2
1 2 3 4 5 6
A
F E
D C Db
Bb C
G A
F E
D Db Eb
Bb C
G
Eb E
Emmons S-8 P/P,DeArmond 40. Slowly drifting back towards sanity.
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
Stan, thanks. That makes the changes much clearer.
I see pedals 2, 3, and 4 are the equivalent of today's pedals 5, 6, and 7, for the most part; these provide the standard II9th, IV9th, diminished, #11 and augmented chords.
Pedal 5 raises the 3rd tone to a 4th, pedals 1 and 6 provide a 9th tone.
Good stuff! Thanks to everyone and Reece especially for the insight into a blast from the past.
I see pedals 2, 3, and 4 are the equivalent of today's pedals 5, 6, and 7, for the most part; these provide the standard II9th, IV9th, diminished, #11 and augmented chords.
Pedal 5 raises the 3rd tone to a 4th, pedals 1 and 6 provide a 9th tone.
Good stuff! Thanks to everyone and Reece especially for the insight into a blast from the past.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
- Jerry Hayes
- Posts: 7489
- Joined: 3 Mar 1999 1:01 am
- Location: Virginia Beach, Va.
Reece, if you were to transfer that tuning from the S-10 Bigsby to a 12 string guitar, what two strings would you add? Also, that 1st string A note, is that the same pitch as the 3rd string on E9 with the B pedal depressed? Although I'm not much of a 6th player, I'm very interested in the history of the different tunings and this one seems to have a lot of validity and is very interesting!.........JH in Va.
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!