Starting with pedals again

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

Post Reply
User avatar
George Kovolenko
Posts: 128
Joined: 18 Sep 2007 3:15 pm
Location: Estero, Florida, USA

Starting with pedals again

Post by George Kovolenko »

I've been playing 6-sting lap steel (C6th) for the last 3 years and am thinking of moving to a pedal steel. I own a Sho-bud Maverick that I bought back in the mid 70's when I was playing county folk music. Based on reading a number of posts here, would I be better off staying with the Maverick for a while to learn or would I be better off upgrading to something a little more current that has more than 1K and 3 P's? Thanks, George
User avatar
Andy Sandoval
Posts: 5176
Joined: 22 Jul 2004 12:01 am
Location: Bakersfield, California, USA
Contact:

Post by Andy Sandoval »

Hi George, I would recommend at least 3 pedals and 4 knee levers. Most of the instructional material out there is geared to a 3X4 setup. I'm not familiar with the several entry level steels that are available but I'm sure someone will chime in here soon with more info for ya. Good luck with your playin. :)
User avatar
Carl Kilmer
Posts: 2691
Joined: 7 Aug 2008 1:23 pm
Location: East Central, Illinois

Post by Carl Kilmer »

Hi George,
If your going to be serious about playing a pedal steel,
you should have a minimum of 3 pedals and 2 knee levers.
You will at least need to raise and lower the 4 & 8 strings.
I started with a Sho-bud Maverick back in the early 70's too
and found I couldn't do much at all with it, and got rid of it.
Almost every steel today has at least 4 knees, and others have 5.
Just my 2 cents, to help you get started in the right direction.
I'm relearning from scratch again after an accident 3 years ago.
It takes time, dedication, and a lot of practicing to play good.
Stick with it, and don't get discouraged. I'll know you'll make it.

Carl "Lucky" Kilmer
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
User avatar
Allan Jirik
Posts: 391
Joined: 16 Feb 2010 3:45 pm
Location: Wichita Falls TX

Post by Allan Jirik »

George,
I'm back with pedals too. I'd say sell the Maverick and look into a quality intermediate guitar or a used "pro" model. I've got a Stage One 3x4, reasonably priced. I love it! Good luck.
User avatar
Carson Leighton
Posts: 591
Joined: 4 Aug 1998 11:00 pm
Location: N.B. Canada

Post by Carson Leighton »

George,,although there is a ton of stuff you can play on that little Maverick,,I would look for something with at least 3 pedals and 4 knee levers..You'll be ahead in the long run...Just my opinion...Carson
Ray Minich
Posts: 6429
Joined: 22 Jul 2003 12:01 am
Location: Bradford, Pa. Frozen Tundra

Post by Ray Minich »

One thing I found out a month or two ago...

If you spent your formative years "pedal-less", then graduated to pedals, when called upon to flail away on a non-pedal, it's easy.
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams...
Bob Vantine
Posts: 609
Joined: 6 Mar 2010 9:36 am
Location: Freeville, New York, USA

Post by Bob Vantine »

George....

Everything that Allan said is a duplicate for me .

Mav in the late 70s , back to pedals now with a Stage One . :) :)

****Bob V****
EQUIPMENT:
"TEAK" ZUM STAGE-ONE Steel / C6th Lapsteel
Peavey NV112 , CLASSIC and EFX112 amps
Peavey Guitars
User avatar
George Kovolenko
Posts: 128
Joined: 18 Sep 2007 3:15 pm
Location: Estero, Florida, USA

Post by George Kovolenko »

Good advice guys. I think I'm going to set up the Maverick and take some pics here soon to sell her. In the meantime, I'll use it to practice on a little to get used to E9th tuning, string spacing etc. and look for a decent 3pX4L to upgrade to. Thanks for all of your input. BTW, I still also plan on playing the Lap Steel.
Post Reply