Humidity Range for Musical Equipment?
Moderator: Shoshanah Marohn
- Allan Jirik
- Posts: 391
- Joined: 16 Feb 2010 3:45 pm
- Location: Wichita Falls TX
Humidity Range for Musical Equipment?
I'm considering setting up a music room in the basement, in a 12x12 area that I've carpeted and added temporary walls. It's cool down there but not clammy. I'm going to measure the indoor humidity, but need to know what the tolerable range is for musical instruments both electric and acoustic. I guess I could add a dehumidifier if necessary. Thanks for the input.
-
- Posts: 605
- Joined: 20 Jan 2009 5:15 pm
- Location: Way out West
- John Ummel
- Posts: 405
- Joined: 24 Jun 2005 12:01 am
- Location: Arlington, WA.
Hi Allan,
Good question.
Too dry is often the bigger problem. Thats why they sell humidifiers like the "Dampit" for guitars and other wooden instruments.
http://www.maurysmusic.com/humidity___acoustic_guitars
Good question.
Too dry is often the bigger problem. Thats why they sell humidifiers like the "Dampit" for guitars and other wooden instruments.
http://www.maurysmusic.com/humidity___acoustic_guitars
- Jim Cinney
- Posts: 144
- Joined: 1 Nov 2007 10:44 am
- Location: Tehachapi California, USA
- Contact:
Hi Allan, I have several acoustic guitars as well as electric and a pedal steel.I try to keep the relative humidity in my room to 40%..Here in so cal it is like a desert.and with ac on in the summer and the forced air heat in the winter humidity can drop to single digits.as stated before, too dry is bad!!! things will crack.!!!!!!.anything over 60 % creates other problems,I try to keep between those numbers.
good luck.
good luck.
- Jesse Leite
- Posts: 142
- Joined: 1 Sep 2009 9:00 pm
- Location: Ontario, Canada
- Contact:
I've been told 40% to 60% relative humidity is ideal for instruments (especially acoustic guitars as they are build with thin tops and sides, so fluctuation can make a big difference throughout the life of the instrument). Anything dryer than 40% can be dangerous (I had a Takamine crack, and a neck twist; both of which I suspect happened because of dryness). Anything over 60% to 70% and you are getting into mildew territory I think.
Playing an '81 BMI SD-10 4&6 through a Peavey Delta Blues 2x10 all-tube amp.
E9 Fretboard Reference Booklet (Chords & Scales PDF)
E9 Fretboard Reference Booklet (Chords & Scales PDF)
-
- Posts: 128
- Joined: 18 Jun 2006 12:01 am
- Location: Texas, USA
Our part of the country is very humid, so that can be a real problem here. My instruments are in a little building that was way too wet, on the verge of mildew. I finally broke down several years ago and got a de-humidifier and maintain 50-60% humidity all the time. Everything is much happier, and trust me, a 50% humidity guitar sounds much better that an 80-90% humidity guitar.
- Allan Jirik
- Posts: 391
- Joined: 16 Feb 2010 3:45 pm
- Location: Wichita Falls TX
I've got a humidifier on the furnace that has summer and winter settings so I guess I don't have to worry about it too much. There were pics posted recently of a couple steels that looked like they were pulled out of a swamp... I just don't want mine to end up like that! I can't help the sour notes I produce but I CAN keep the guitar in good shape.