The original Steel Guitar Work Stands

Bob Cox · Post by **Bob Cox** » 14 May 2010 8:41 am

These Heavy Duty Stands made of welded steel will help save on your back during your steel guitar setup on pedals, and Knee levers. Prevents setting it back up and down countless times. Now you can hear your changes being made while on the table. Great for push pull tweaking, or about any all pull pedal steel you are working on. Your guitar can be hooked to your amp while tweaking so you can hear whats going on with plenty room to reach under and strum your guitar. The new stands are slotted and fastened easily simply by loosening leg a bit and sliding it right in and tighten leg , or a 1" no. 13 cap screws can be used ,not included. Email for details and info.

John McClung · Post by **John McClung** » 15 May 2010 1:09 pm

Price?

Bill Moran · Post by **Bill Moran** » 15 May 2010 3:29 pm

Do these work on anything other than a push pull ?

D.C. Williams · Post by **D.C. Williams** » 15 May 2010 3:52 pm

The real question should be "if you use these to work on a guitar that isn't a P/P, will they make sound as good as a P/P?

Bob Cox · Post by **Bob Cox** » 15 May 2010 4:11 pm

They will work on any steel with standard 1/2" or 5/8" legg socket. Thanks Bob

Lane Gray · Post by **Lane Gray** » 29 Mar 2016 10:06 am

Bob, I want a set. I emailed you, but no reply. Anyone got a set?

Andy DePaule · Post by **Andy DePaule** » 6 Mar 2017 1:34 am

Hi Bob,
Do you still make these PSG stands?
I see the last post was about a year ago...
If yes, how much and do they come with the bolts?
Also do you take PayPal?
It would be shipped to Oregon.
Thanks,
Andy

DePaule Supply Viet Nam
C. Andy DePaule
49/30 Vo Van Tan
Phuong 6, Quan 3
TP HCM, Viet Nam

Viet Nam Office Phone; 011-84-8-668-17861
To reach the Viet Nam office;
andydepaule@luthiersupply.com
http://www.luthiersupply.com

Andy DePaule · Post by **Andy DePaule** » 6 Mar 2017 1:35 am

Hi Bob,
Do you still make these PSG stands?
I see the last post was about a year ago...
If yes, how much and do they come with the bolts?
Also do you take PayPal?
It would be shipped to Oregon.
Thanks,
Andy

DePaule Supply Viet Nam
C. Andy DePaule
49/30 Vo Van Tan
Phuong 6, Quan 3
TP HCM, Viet Nam

Viet Nam Office Phone; 011-84-8-668-17861
To reach the Viet Nam office;
andydepaule@luthiersupply.com
http://www.luthiersupply.com

Stu Schulman · Post by **Stu Schulman** » 8 Mar 2017 2:52 am

I would like to get a set of these...how do I do it?

Gary Ackley · Post by **Gary Ackley** » 10 Jun 2017 11:32 am

I just received a set of these stands.

Very nicely made, fair price, fast service.

These will be fantastic for close looks at the underside of my guitar.

The elevation provided by the stands will allow full access to the strings
while the guitar is bottoms up.

Bob is a great guy to do business with.

Thanks, Bob.

Gary Ackley

Tim Russell · Post by **Tim Russell** » 10 Jun 2017 12:13 pm

I got a set a month or so ago. Bob replied to my pm's promptly & sent them right out. Well built, they work great!

John McClung · Post by **John McClung** » 12 Jun 2017 5:32 pm

I have an early set of these, quite handy for working under the hood. Until I design and build a custom PSG workstand like Jim Palenscar's, these work fine.

Andy DePaule · Post by **Andy DePaule** » 12 Jun 2017 5:51 pm

Hi John,
I tracked him down and bought a set.
He is a forum member.
Now can't find the e-mails we exchanged so don't remember the address.
Best wishes,
Andy

John Brabant · Post by **John Brabant** » 23 Jun 2017 4:57 pm

I bought a set of these from Bob off Ebay where he also lists them for sale. These things are an absolute must for working on your steel, other than building a Jim Palenscar style work station.

Jeff Metz Jr. · Post by **Jeff Metz Jr.** » 24 Jun 2017 8:45 am

I have a set of stands that I made myself. Another handy way to use them is to build a simple rectangle frame out of wood and bolt these legs to that. Then you just flip your guitar over onto the stand.

Dave Meis · Post by **Dave Meis** » 30 Jun 2017 3:44 pm

I PM'd Bob on Tuesday, and got my stands today. Thanks Bob!

Jerry Erickson · Post by **Jerry Erickson** » 2 Jul 2017 3:49 pm

How much do they cost?

Bob Cox · Post by **Bob Cox** » 26 Feb 2020 3:12 pm

Doug Hall · Post by **Doug Hall** » 6 Mar 2020 12:13 am

Price pls?

Chuck Snider · Post by **Chuck Snider** » 7 Mar 2020 7:51 pm

Hi Bob,
Sent you an email regarding a set of your workbench legs. I didn't mention it in my email to you, but I'll mostly be using these on a couple of Emmons push-pull guitars, as well as a Sho-Bud, a Carter, and a GFI. As far as I can tell, these legs should work on most any brand or model PSG, correct?

Thanks,
-Chuck

Lee Warren · Post by **Lee Warren** » 8 Mar 2020 7:16 am

Email sent to Bob Cox

Steve Schmidt · Post by **Steve Schmidt** » 8 Mar 2020 5:00 pm

Great product. I just got mine last week and used them for a customers PP and now I'm doing some work on my own PP. Highly recommend them.

Bob Cox · Post by **Bob Cox** » 19 Mar 2020 5:37 pm

Thanks for wonderful reply Steve!

The Steel Guitar Forum

The original Steel Guitar Work Stands

The original Steel Guitar Work Stands

Do you still make these PSG stands?

Steel maintenance stands

I got them now

Pedal Steel work stands

Workbench legs

stands