Biab ? On Tabs With Biab
Moderator: David Collins
-
- Posts: 121
- Joined: 18 Oct 2007 12:12 pm
- Location: Florida, USA
Biab ? On Tabs With Biab
Hi you all, Is there any way to use BIAB for transposing Notations to 10 string pedal steel guitar Tabs? WELCOME ANY INFO ON ANY OF THE ABOVE. THANKS, Art M -- I have 2009.5 OMNIPAK with HARD DRIVE--
-
- Posts: 204
- Joined: 20 Sep 2007 1:55 pm
- Location: Charlotte, North Carolina
BIAB is not programmed to provide more than 6 strings of tab.
What you CAN do is save your song (just the track you want to transpose not all the instruments) as a MIDI file.
Then purchase ClicTab software http://www.clictab.com/
and import the MIDI file into ClicTab. You will need to set up the copedant to match your guitar but if you have never seen this software it is quite nice and VERY easy to use.
Good luck Bo
What you CAN do is save your song (just the track you want to transpose not all the instruments) as a MIDI file.
Then purchase ClicTab software http://www.clictab.com/
and import the MIDI file into ClicTab. You will need to set up the copedant to match your guitar but if you have never seen this software it is quite nice and VERY easy to use.
Good luck Bo
-
- Posts: 121
- Joined: 18 Oct 2007 12:12 pm
- Location: Florida, USA
Reply
Thanks Gary, I have Clicktab and it stopped my printers (3 printers) from printing. So I had to remove the program. Now I have TabEdit for Notations to Tabs. I don't know If I can do what you stated with TabEdit as I am kinda new to all this. Art M
-
- Posts: 204
- Joined: 20 Sep 2007 1:55 pm
- Location: Charlotte, North Carolina
Re: Reply
That's too bad. Never had any problems with ClicTab.Arthur Manning wrote:Thanks Gary, I have Clicktab and it stopped my printers (3 printers) from printing. So I had to remove the program. Now I have TabEdit for Notations to Tabs. I don't know If I can do what you stated with TabEdit as I am kinda new to all this. Art M
So . . . . Three step process to use TabEdit.
Step one: read this from the help files:
TablEdit 2.65 Help
:Under {Score}{Instrument}, set the MIDI instrument to either viola or cello. It produces a nice, natural sounding, tremolo on playback without having to write it into the tab, making it appear "busy". It's really no less PSG-sounding than electric guitar and allows two consecutive whole notes to sound for their entire duration.
"Splits" are defined as either:
The half-press of a pedal or A pedal and a lever acting together so that the effect on a string is the sum of their individual effects.
To include "Splits" in the tablature, rename an unused change as "A/2" for the half press of pedal A and another unused change as BRL to reflect the net effect of the changes associated with the "B" pedal and the "RKL" lever on string 6."
Step Two:
Go to the main menu "SCORE" and then Instrument and chose Pedal Steel Guitar - choose either 10 or 12 for the number of strings and change the instrument as noted above.
Step Three:
Save your BIAB file as a MIDI file with ONLY the instrument you want to provide tab for. Then import it into TabEdit.
Sounds like a lot, but after a few times it will go fairly fast.
Good luck, Bo
-
- Posts: 121
- Joined: 18 Oct 2007 12:12 pm
- Location: Florida, USA
Tabs
Thanks again Gary, I will give it a try after the holidays. I just ordered the BIAB 2010 with the hard drive and when I install it I will have at it. You and all have the best of Holidays. Art M