Who Uses FX Pedals...?

David Hartley · Post by **David Hartley** » 28 Oct 2009 4:49 pm

Please answer ASAP...? Please answer the other poll too after voting on this one..

Its here..

http://bb.steelguitarforum.com/viewtopic.php?t=170221

Regards
David Hartley

Terry Sneed · Post by **Terry Sneed** » 28 Oct 2009 4:59 pm

David, I use a DD-3 delay mainly for trying to learn OBS from your DVD.

I use the amp reverb on my Nashville 1000, it has the Burr Brown chip mod, which IMO sweetens up the reverb, and overall sound of the amp.

terry

Loren Claypool · Post by **Loren Claypool** » 28 Oct 2009 6:52 pm

See specifics on gear page at www.lorenclaypool.com.

Steve Hitsman · Post by **Steve Hitsman** » 29 Oct 2009 4:07 am

Line 6 Echo Park and ElectroHarmonix Holy Grail.

Dan Najvar · Post by **Dan Najvar** » 29 Oct 2009 4:14 am

Hi,
I currently use a pod 2.0 but in the past I have used many differnt pedal including wah and talk box. The pod has everything I would want at this time.

Gary Cosden · Post by **Gary Cosden** » 29 Oct 2009 4:21 am

Digitech RV 7 Hardwire for reverb.

Steve Norman · Post by **Steve Norman** » 29 Oct 2009 5:03 am

EHX one echo for , uh well echo. amp reverb is fine for me.

Cliff Kane · Post by **Cliff Kane** » 29 Oct 2009 6:11 am

I have a pedalboard with effects boxes on it. I use it sometimes according to the song as my band plays a variety of stuff. Mostly I use them for distortion and delay, sometimes phase or chorus and a filter. That being said, the best tone is my Emmons through the Sarno Freeloader and Goodrich 120 volume pedal to my Fender Twin Reverb with out any other signal processing. My amp's reverb sounds better than the stomp boxes I have tried.

Ben Jones · Post by **Ben Jones** » 29 Oct 2009 6:17 am

distortion/preamp -seymour duncan twin tube classic
dobro sim-Boss GE7
delay-BYOC
reverb from amp

James Mayer · Post by **James Mayer** » 29 Oct 2009 7:04 am

Ibanez DE7
Maestro EP-4
Verbzilla sometimes

Erv Niehaus · Post by **Erv Niehaus** » 29 Oct 2009 7:08 am

When I play pedal steel, I usually use a rack setup with rack effects.
However, I do use some stomp boxes when playing non-pedal or lap steel.

Rich Hlaves · Post by **Rich Hlaves** » 29 Oct 2009 8:22 am

Can you call a Fender tube reverb unit a pedal? Maybe in an old school sense? It does sit on the floor and is controlled by a footswitch. It gets used with non-reverb amps like Showman and the Bandmaster. The Fender tube driven spring units, internal or external, are my faves.

Pedal: Ibanez analog delay

Erv Niehaus · Post by **Erv Niehaus** » 29 Oct 2009 8:25 am

Rich,
You mean like this:

Don Drummer · Post by **Don Drummer** » 29 Oct 2009 9:18 am

James Mayer · Post by **James Mayer** » 29 Oct 2009 9:24 am

Erv Niehaus wrote:Rich,
You mean like this:

I badly want one of those for my baritone guitar. Thinking of building my own from a kit and housing it in something cheap like an old sturdy mailbox.

John Phinney · Post by **John Phinney** » 29 Oct 2009 9:38 am

When I use a pedalboard this is it (for now):
BYOC Mighty Mouse
Dunlop UniVibe
MoogerFooger MuRF
Boss DD20 delay
built in amp reverb (usually Nashville 400) or EH Holy Grail

Erv Niehaus · Post by **Erv Niehaus** » 29 Oct 2009 9:55 am

James,
I picked up this Fender reverb a few years ago.
It is a re-issue of the original.
I did have one of the original ones, however.
I used it along with a Fender Bassman to play through.
At present, I use the Fender reverb along with this re-issued Fender Twin (no reverb on the amp).

Rich Hlaves · Post by **Rich Hlaves** » 29 Oct 2009 11:32 am

Erv,

That's the baby. Mine is blonde with oxblood grill. I will be looking for a tweed cab or a second tweed unit to use with my Tweed Fox bassman.

I'm just not fond of digital reverb. It sounds a bit funny to me, almost a grainy sound, must be my ears. DD can be ok.

Best,

Rich

Erv Niehaus · Post by **Erv Niehaus** » 29 Oct 2009 12:03 pm

Rich,
I know just what you're saying.
I tried to dial in a Boss RV-5 the other night and just couldn't get the sound I was looking for.

John Groover McDuffie · Post by **John Groover McDuffie** » 29 Oct 2009 12:29 pm

You need a third option on your poll: Sometimes

I sometimes use a delay pedal - lately an MXR Carbon Copy analog delay, sometimes a Boss DD5. But I prefer my Ibanez AD202 rack unit.

I also use pedals for fuzz and overdrive with PSG. It depends on the type of music the gig involves.

I don't have a reverb pedal, but I have a Boss 1/2 rack space digital reverb unit I use when I can't use amp reverb. Kind of noisy, but it has that "paid for" feature that I like.

Roman Sonnleitner · Post by **Roman Sonnleitner** » 29 Oct 2009 12:29 pm

EHx Holy Grail reverb
Artec SE-ADL delay

Twayn Williams · Post by **Twayn Williams** » 29 Oct 2009 2:02 pm

Boss ME-20 multifx unit.

Really I have it because the volume pedal is very, very low. I use the delay, tuner, a faux-leslie patch, and a tube-screamer type OD. Usually I just use the vp and delay though. Reverb comes for the amp.

Geoff Cline · Post by **Geoff Cline** » 29 Oct 2009 5:25 pm

I am experimenting with a Morley EVO-1 oil can delay pedal and a Digilog Delay by Freak Show effects. Each has a very different sound.

Love me some oil can delay...so organic and syrupy...really liking the way it interacts with the PSG.

Johnny Thomasson · Post by **Johnny Thomasson** » 30 Oct 2009 10:16 am

Boss DD-20 digital delay
Boss RV-5 digital reverb

One or the other, but never both at the same time. It depends on which amp I'm in the mood to use.

Donny Hinson · Post by **Donny Hinson** » 30 Oct 2009 10:54 am

Most all the time, I just use the EFX built into my amp.

The Steel Guitar Forum

Who Uses FX Pedals...?

Who Uses Boss or Similar Floor Pedals for Reverb and Delay?

Who Uses FX Pedals...?

Effects