low-watt amps
Moderator: Brad Bechtel
-
- Posts: 54
- Joined: 2 Jan 2003 1:01 am
- Location: Bonny Hills, NSW, Australia
Howdy Drew,
I use a Fender Deluxe Reverb RI, a great little amp and at 22watts, its really a loud amp for the power
Great clean sound and starts to overdrive at around 3.5 - 4.
Usually dont wind her past 4. Thats plenty loud on stage, then the PA does the rest.IMHO a good combo with Tele & Stringmaster.
Pete
I use a Fender Deluxe Reverb RI, a great little amp and at 22watts, its really a loud amp for the power
Great clean sound and starts to overdrive at around 3.5 - 4.
Usually dont wind her past 4. Thats plenty loud on stage, then the PA does the rest.IMHO a good combo with Tele & Stringmaster.
Pete
- Drew Howard
- Posts: 3910
- Joined: 4 Aug 1998 11:00 pm
- Location: 48854
- Contact:
YES!
Peter,
I'm using a friend's ten-year-old DRRI and want him to sell it to me, it is the perfect amp for my Stringmaster as well!! I tried out a new DRRI and it was pretty clean even when cranked. I need that earlier break-up. Perhaps it's the speaker inside. The guitarist in the band has a DRRI as well. He said changing the speaker cable in those amps makes a huge difference in sound.
cheers,
Drew
I'm using a friend's ten-year-old DRRI and want him to sell it to me, it is the perfect amp for my Stringmaster as well!! I tried out a new DRRI and it was pretty clean even when cranked. I need that earlier break-up. Perhaps it's the speaker inside. The guitarist in the band has a DRRI as well. He said changing the speaker cable in those amps makes a huge difference in sound.
cheers,
Drew
- Brian LeBlanc
- Posts: 418
- Joined: 5 May 2005 12:01 am
- Location: Falls Church, Virginia, USA
Speaker Cable?
Changing speaker cable makes a big dif in sound?
Never heard that...
Never heard that...
'Frenchy' LeBlanc...
ShoBud & Twins
ShoBud & Twins
- Loni Specter
- Posts: 922
- Joined: 26 Jun 2001 12:01 am
- Location: West Hills, CA, USA
- Contact:
Re: Speaker Cable?
Changing the player makes an even bigger differenceBrian LeBlanc wrote:Changing speaker cable makes a big dif in sound?
Never heard that...
Actually high quality, low capacitance cables can improve signal and clarify tone.
- Dennis Schell
- Posts: 307
- Joined: 30 Jan 2007 3:41 pm
- Location: Shingletown, Shasta county, Kalifornia
Re: Cheap Vibro Champ?
Gee, I would've sold you mine cheaper than that! Have you checked in the local pawnshops? Usually, there are some good bargains on equipment and guitars that sit around and don't sell for awhile....Brian LeBlanc wrote:... I just paid $300 !
...for a 71'
Dennis
"Bucks Owin"
- Brian LeBlanc
- Posts: 418
- Joined: 5 May 2005 12:01 am
- Location: Falls Church, Virginia, USA
Pawnshops...& Speaker Cables
Nothing pre 1980 with Fender on it never even hits the Pawns around here!
Ebays seem to be over $3...
(also this guy delivered to my gig)
...
on "Speaker Cable" for a Deluxe Reverb...
What cable we talken about?
Ebays seem to be over $3...
(also this guy delivered to my gig)
...
on "Speaker Cable" for a Deluxe Reverb...
What cable we talken about?
'Frenchy' LeBlanc...
ShoBud & Twins
ShoBud & Twins
-
- Posts: 864
- Joined: 15 Nov 2006 1:01 am
- Location: Creston, California, USA
$300 for a 70's Fender Vibro Champ is a good price if it works well. You can play these for years and sell it for what you paid or maybe even more. They are great for all types of music considering thier size. It's a classic and the Tremolo is pretty cool. I have three of them besides my other styles and brands of amps.
I had a 5-watt Gibson GA5 Les Paul Junior amp (newer model). Sucker hummed too much. Side-by-side with other Class A amps, the Gibson was too noisy. Sent it back to Gibson. Lousy customer service. Techs with attitude. They sent it back to me, not fixed, with the power tube flopping around in the box. I faxed the company CEO and asked him why his customer service sucked. Gibson sent prepaid shipping label, replaced the amp with a newer model. Still hummed. I dumped it. Gibson sucks, in more ways than one.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Randy Cordle
- Posts: 134
- Joined: 8 Jun 2006 12:01 am
- Location: Illinois, USA
- Contact:
I've got a few small tube amps and bought the Epi valve jr. head from Musician's Friend. I was going to team it up with a custom tweed cabinet with a Weber alnico 12" that I purchased for this project, but it was dead on arrival. Sent the first one back and its replacement was dead also. MF was very nice to deal with, but I just got a refund and decided that someone doesn't want me to have an Epi valve jr. head. I've been working with sound equipment and electronics for 40 years, so I know it wasn't me.
I'm thinking of getting the brand new Peavey Royal 8 five watt tube amp and putting it in my new cabinet instead. It's $75 more, but I can ebay the cabinet and speaker and get some of that back. I've always had pretty good luck with the Peavey stuff.
I'm thinking of getting the brand new Peavey Royal 8 five watt tube amp and putting it in my new cabinet instead. It's $75 more, but I can ebay the cabinet and speaker and get some of that back. I've always had pretty good luck with the Peavey stuff.
-
- Posts: 3740
- Joined: 29 Oct 2002 1:01 am
- Location: Saginaw, Michigan, USA (deceased)
I'm a tube guy, but I have a Microcube!!
This winter I built a clone/Fender Tweed Deluxe, a clone/Fender Princeton Reverb, and three amps based on a Valco design with different tubes and caps etc in each one.
To me, the Valco types have the tone I want. The Tweed Deluxe isn't what I would go out and buy, although Fender is just coming out with a re-issue of it. I wonder what that one is gonna cost!!
All the above mentioned are 6V6 type push-pull AB types. I haven't built a single-end class A type (yet)
This winter I built a clone/Fender Tweed Deluxe, a clone/Fender Princeton Reverb, and three amps based on a Valco design with different tubes and caps etc in each one.
To me, the Valco types have the tone I want. The Tweed Deluxe isn't what I would go out and buy, although Fender is just coming out with a re-issue of it. I wonder what that one is gonna cost!!
All the above mentioned are 6V6 type push-pull AB types. I haven't built a single-end class A type (yet)
-
- Posts: 704
- Joined: 6 Dec 2003 1:01 am
Hmm... I think should check mine out.Alan Kirk wrote:I had a 5-watt Gibson GA5 Les Paul Junior amp (newer model). Sucker hummed too much. Side-by-side with other Class A amps, the Gibson was too noisy. Sent it back to Gibson. Lousy customer service. Techs with attitude. They sent it back to me, not fixed, with the power tube flopping around in the box. I faxed the company CEO and asked him why his customer service sucked. Gibson sent prepaid shipping label, replaced the amp with a newer model. Still hummed. I dumped it. Gibson sucks, in more ways than one.
-
- Posts: 3740
- Joined: 29 Oct 2002 1:01 am
- Location: Saginaw, Michigan, USA (deceased)
I've never been a big fan of Gibson stuff, but I do have an old GA8T amp. I tried to sell it once, but no takers. I finally got into it and replaced a bunch of coupling caps in the pre-amp section to bring out more bass. That did the trick big-time. Now I like the way it sounds and I'm gonna keep it!!
It has zero hum, hard to tell it's on, but it was always a quiet amp.
Lots of power, EL84s in push-pull.
It has zero hum, hard to tell it's on, but it was always a quiet amp.
Lots of power, EL84s in push-pull.
- Randy Cordle
- Posts: 134
- Joined: 8 Jun 2006 12:01 am
- Location: Illinois, USA
- Contact:
I did what I said I was going to do and picked up Peavey's new entry in the 5 watt club. It was $100 more than a Epi head, but worth it. Thought I might as well add a quick review if anyone is interested. For the record, I love low watt tube amps when pushed a little, but also dislike dealing with older (read vintage)tube amp issues. I'm still waiting for someone to do a 1 watt amp with the gain, tone, and master volume controls. Five watts is still seriously loud. You can gig with 5 tube watts in smaller venues, and larger ones will mic your stage monitor amp or feed you DI to the board anyway, so why haul more amp than you need to get the tone you want?
Here's the lowdown. Peavey Valve King Royal 8, 5 watts, class A, 12AX7 & EL84 tubes, gain , tone, master volume controls, low and high gain inputs, headphone output (disconnects speaker for late nite playing), jeweled pilot light and REAL toggle switch. All in all a great amp so far. It has a lot of versitility straight from the box, but I plan on putting it in a custom tweed cabinet with a Weber 12" driver. I do like an amp that pushes a little more air, and a 12" will do it. I do like the ability to overdrive the amp at low volume and the tone control is also quite nice to have. I've got a fair amount of Peavey equipment already, and for good reason. Most of it works fine and lasts a long time. What more can you ask for if you like the sound? This one is a keeper.
Here's the lowdown. Peavey Valve King Royal 8, 5 watts, class A, 12AX7 & EL84 tubes, gain , tone, master volume controls, low and high gain inputs, headphone output (disconnects speaker for late nite playing), jeweled pilot light and REAL toggle switch. All in all a great amp so far. It has a lot of versitility straight from the box, but I plan on putting it in a custom tweed cabinet with a Weber 12" driver. I do like an amp that pushes a little more air, and a 12" will do it. I do like the ability to overdrive the amp at low volume and the tone control is also quite nice to have. I've got a fair amount of Peavey equipment already, and for good reason. Most of it works fine and lasts a long time. What more can you ask for if you like the sound? This one is a keeper.
- Clete Ritta
- Posts: 2005
- Joined: 5 Jun 2009 6:58 pm
- Location: San Antonio, Texas
How about those old Danelectro Cadets or other models?Drew Howard wrote:I would love to find something that's older and not Fender, like a Silvertone, Gibson, etc.
Anyway, what do you use/recommend?
thanks,
Drew
The fact that these were made in Neptune, NJ in no way affects my biases and superstitions towards these relics.
The "Cadet" was my very first amp. Kinda collectible. Heres a "Corporal" (slightly bigger 10 watt version) on ebay currently:Gary Lynch wrote:If you folks have not played your lap steel through a Honeytone by Danelectro, it's a trip. It sounds like a 1930's recording. Something Tom Waits would lay a mic close to and record it. Way funky but retro cool distortorama also..
Link to auction on eBay.
Clete
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Gerald Ross
- Posts: 3205
- Joined: 4 Aug 1998 11:00 pm
- Location: Ann Arbor, Michigan, USA
- Contact:
Drew,
I have a 10 year old DRRI in M-I-N-T condition (with protective cover!). It's for sale. Let's talk. You can come down to A2 and try it out. It'll be fun.
GBR
I have a 10 year old DRRI in M-I-N-T condition (with protective cover!). It's for sale. Let's talk. You can come down to A2 and try it out. It'll be fun.
GBR
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'
A UkeTone Recording Artist
CEO, CIO, CFO - UkeTone Records
Gerald's Hawaiian Steel Guitar/Ukulele Website
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar'
A UkeTone Recording Artist
CEO, CIO, CFO - UkeTone Records
Gerald's Hawaiian Steel Guitar/Ukulele Website
-
- Posts: 3740
- Joined: 29 Oct 2002 1:01 am
- Location: Saginaw, Michigan, USA (deceased)
My Fenders haven't been turned on for over a year. I don't like their "scooped mid" sound. The Valco/Supro/National amps don't seem to do that, and are my favorites for tone.
I had a new Fender Acoustasonic Junior for a while. Solid state. Didn't like that either, and loaned/gave it to my niece, and told her not to ever bring it back.
I had a new Fender Acoustasonic Junior for a while. Solid state. Didn't like that either, and loaned/gave it to my niece, and told her not to ever bring it back.
- Rocky Hill
- Posts: 107
- Joined: 6 Jul 2007 3:46 pm
- Location: Prairie Village,Kansas, USA
- George Rozak
- Posts: 591
- Joined: 26 Feb 2000 1:01 am
- Location: Braidwood, Illinois USA
- George Rozak
- Posts: 591
- Joined: 26 Feb 2000 1:01 am
- Location: Braidwood, Illinois USA
- Veli-Pekka Haanmäki
- Posts: 68
- Joined: 26 Jan 2009 1:02 pm
- Location: Finland
I play my lap steel through older model BadCat MiniCat,very nice and warm little amp.Here is a link to the new model: http://www.badcatamps.com/badcat_amps.html
-
- Posts: 807
- Joined: 20 Jan 2003 1:01 am
- Location: Nashville, Tennessee, USA
I would recommend the Deluxe Reverb. The extra 7 watts it has over the Blues Jr. Makes it an amp that can keep up with a drummer but still is ideal for low volume perforances. Plus, it has Tremelo which is nice for guitar. Also it is a two channel amp so you can run your Tele and Stringmaster simultaniously without the need to unplug and replug you guitars inbetween songs or solos.
I use a Deluxe Reverb as my main amp and have played it in living rooms with acoustic accompaniment and small clubs as well as in large theaters, auditoriums wand outdoor ampetheaters with loud drums and electric bands. It's just the right amp for just about any application.
CS
I use a Deluxe Reverb as my main amp and have played it in living rooms with acoustic accompaniment and small clubs as well as in large theaters, auditoriums wand outdoor ampetheaters with loud drums and electric bands. It's just the right amp for just about any application.
CS
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
My 2 cents:
I like the Deluxe, I also use a Champ Jr. with an AB box for multi instruments into it. Its the simple one tone knob setup.
I like the Deluxe, I also use a Champ Jr. with an AB box for multi instruments into it. Its the simple one tone knob setup.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
- Marty Broussard
- Posts: 2378
- Joined: 18 Oct 2002 12:01 am
- Location: Broussard, Louisiana, USA
I know this thread is old but I want to share some information that might help others. In my quest for a low watt/portable tube amp I found a device called the Rock Block. You can google it and go to the website. It looks very interesting, flexible, and guaranteed portable!! It can be used as an amp or a pedal. You can see it on YouTube also.