Boss RV-3 vs RV-5

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Jon Irsik
Posts: 300
Joined: 4 Aug 1998 11:00 pm
Location: Wichita, KS USA

Boss RV-3 vs RV-5

Post by Jon Irsik »

Can someone give me a comparison on these two pedals? It looks like v3 has reverb with delay where v5 has the ability to add slight chorusing with reverb, but no delay?. Are the verbs similar and is the chorus effect useable for steel?

Thanks,

Jon
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

The RV-3 is a combination reverb and delay pedal.
The RV-5 is strictly a reverb pedal.
Both are good sounding pedals, however with the RV-3, you are rather limited in fine tuning the effects.
You have more reverb adjustments with the RV-5 but at the sacrifice of the delay function.

There is a new pedal out now made by Digi Tech, the RV-7.
It has the Lexicon reverbs in it which are hard to beat.
User avatar
Brian McGaughey
Posts: 1185
Joined: 3 Nov 2006 1:01 am
Location: Orcas Island, WA USA

Post by Brian McGaughey »

Erv's got it.

The RV-3 can has 4 pre-set combinations of reverb and delay. These are: Room 1, Room 2, Plate and Hall. I look at these settings and apply them to my sound as reverb w/ slap back. It is indeed reverb combined with delay but limited control.

I've assumed these weren't extremely popular over all or they'd still make a stomp-box version with both effects. I like mine.
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

Brian,
I think Boss is good at marketing.
Why sell one unit with both reverb and delay when they can sell two units; one for reverb and the other for delay.
I have an RV-5 and use it together with a DD-5, delay unit.
KENNY KRUPNICK
Posts: 3527
Joined: 16 Jul 2000 12:01 am
Location: Grove City,Ohio

Post by KENNY KRUPNICK »

Try a DD-3,or a DD-6 with a RV-5. 8)
User avatar
Larry Bressington
Posts: 2809
Joined: 6 Jul 2006 12:01 am
Location: Nebraska

Post by Larry Bressington »

I have used both, they are both great!
A.K.A Chappy.
User avatar
Andy Sandoval
Posts: 5176
Joined: 22 Jul 2004 12:01 am
Location: Bakersfield, California, USA
Contact:

Post by Andy Sandoval »

Doesn't Lloyd Green still use an RV-3?
KENNY KRUPNICK
Posts: 3527
Joined: 16 Jul 2000 12:01 am
Location: Grove City,Ohio

Post by KENNY KRUPNICK »

The reverb on the RV-3 is fixed. Not adjustable like the delay on the unit.
Andrew Noecker
Posts: 21
Joined: 8 Jun 2009 2:08 pm
Location: New Hampshire, USA

Post by Andrew Noecker »

The reverb is fixed only with the delay. The reverb alone has a tone and reverb time control knob(s).
Last edited by Andrew Noecker on 16 Sep 2009 11:55 am, edited 1 time in total.
User avatar
Jon Irsik
Posts: 300
Joined: 4 Aug 1998 11:00 pm
Location: Wichita, KS USA

Post by Jon Irsik »

Thanks for words everyone. I'm thinking the RV-5 and DD-3 might be what I'm looking for as far as parameter controls over reverb and delay.

Jon
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

I don't know about the DD-3 but the DD-5 has the tap delay feature.
Tony Smart
Posts: 419
Joined: 18 Nov 2002 1:01 am
Location: Harlow. Essex. England

Post by Tony Smart »

Had the RV-2 since it first came out.

The delay and reverb are both good. Tried the DD-3 but the delay on the RV-2 although limited, sounds better to me.

Always got an open mind though.
User avatar
Cliff Kane
Posts: 1932
Joined: 10 Dec 1999 1:01 am
Location: the late great golden state
Contact:

Post by Cliff Kane »

The RV3 is a good sounding pedal. For a compact reverb and ambient effect it's good and handy. You should run it off an AC adaptor as it will consume batteries very quickly. I had one but I sold it. I've got a few delay pedals that have better sounding delay and more versatile delay, and my amps have good sounding spring reverb, so the pedal was not really needed. I enjoyed it most for extreme ambient effects. You can get a totally wet signal out of the RV3 and that's pretty cool, but not very useful for standard steel guitar playing. The RV3 would be an exceptional pedal if had these features: 1) a high-end roll-off to make it sound less digital (not that I don't like digital, but it would be nice to have a tone control on the delay; 2) a pre-delay feature to send only the delay's return signal to the reverb; and, of course, a tap tempo feature. As is it's a good sounding pedal, but there are more flexible and versatile options, but those are perhaps larger or would be combining two small pedals.
Johnny Thomasson
Posts: 565
Joined: 5 Jan 2007 1:04 pm
Location: Texas, USA

Post by Johnny Thomasson »

Dickie Overby uses an RV-3.
Johnny Thomasson
User avatar
Tom Wolverton
Posts: 2874
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA

Post by Tom Wolverton »

L. Green and D. Overby. That got my attention. I have one and hardly use it. Time to dust it off. And, yes, the AC adaptor is a must.
To write with a broken pencil is pointless.
Charley Hill
Posts: 805
Joined: 18 Oct 2002 12:01 am
Location: The Dirty South
Contact:

Post by Charley Hill »

Andy Sandoval wrote:Doesn't Lloyd Green still use an RV-3?
That was what he was playing through the other day while I was there. Incredible sound coming out of the telonics 12 amp with the pedal.
User avatar
Carl Kilmer
Posts: 2691
Joined: 7 Aug 2008 1:23 pm
Location: East Central, Illinois

Post by Carl Kilmer »

Ron Elliott has used an RV-3 for years with a N112 amp. Super nice sound.
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
David Nugent
Posts: 4817
Joined: 2 Nov 2001 1:01 am
Location: Gum Spring, Va.

Post by David Nugent »

Jon...Before deciding on the DD3, you owe it to yourself to try the new Boss 'Wazacraft' DM2 (analog) reissue. Cost is a bit more but well worth it in my opinion. Analog delays just seem warmer to me, less sterile sounding than digital units for lack of a better term.
User avatar
Bob Poole
Posts: 644
Joined: 12 Mar 2012 5:07 pm
Location: Myrtle Beach SC, USA

Post by Bob Poole »

I just picked up a Waza Craft & I love it....I had an "original" back in the day.I was playing guitar in a blues band back then & bought it from our harp player to use with my Tele/Fender Showman rig,sounded great...I went on to a harp playing gig after that for a few years & used it with great results for harp..I never tried it with my steel back then.Sold it a long time ago and every delay pedal I've tried since made me regret that decision.Very pleased with the Waza Craft.....doggone it....now Hilton has a delay....I'd like to try one of those.
User avatar
Jack Hanson
Posts: 5024
Joined: 19 Jun 2012 3:42 pm
Location: San Luis Valley, USA

Post by Jack Hanson »

I have the Boss DD-3, DD-5, and DD-7 delays and the RV-5 reverb. All sound okay. Also have the Digitech Hardwire RV-7 reverb and DL-8 delay, which to me sound marginally better than the Bosses. All the digital pedals sound somewhat sterile and clinical to my old ears. Plus, they all somewhat disappear into the cymbal wash in a live band situation.

Best sound I've yet to achieve is the combination of a Van Amps Sole-Mate reverb pedal and a Joyo JF-33 analog delay.

The USA-built Sole-Mate is an analog unit with a short MOD spring reverb tank under the hood. It's the same model tank that FMIC installs in their Blues Junior. Somewhat spendy, but worth every penny in my book.

The imported JF-33 is so inexpensive as to be considered disposable, like a BIC lighter.

The Boss and Hardwire digital pedals are all quite versatile with multiple functions. The Sole-Mate and JF-33 are basically one-trick-ponies. But for what they can do, they both do it well in my opinion.
Post Reply