"tech-work" for pedal steel by John Widgren in CT.

Bob Miano · Post by **Bob Miano** » 22 Aug 2009 12:12 pm

Just an FYI for anyone needing any work done on your steel or pedal steel
guitar. I just had John do some "teching" & "tweaking" on both my Zum
and Derby, as well as adding a knee lever change to each.

John does excellent work and I recommend him highly.

If you need his contact info, you can either email me or look him up
on the "forum".

btw, he is also a whale of a player and a heck of a nice guy.

Bob Miano
Washington Township, NJ

Steve Alcott · Post by **Steve Alcott** » 22 Aug 2009 7:23 pm

I'll second that-Whether it's a PP Emmons or an all-pull guitar, John will get it playing as well as it can play.

Don Sulesky · Post by **Don Sulesky** » 23 Aug 2009 2:55 am

Not to mention John is a top notch player as well.
Don

Jerry Kline · Post by **Jerry Kline** » 23 Aug 2009 5:57 am

Purchased an Amp from John.
Beautifully packaged, extra
goodies included, some kind
words and education, freely
given to a newbie. I'd deal
with John again, in the
proverbial 'New York Minute'-
which I understand the definition
is; " The amount of time from
when the light turns 'green', to
when the 1st horn sounds. "

john widgren · Post by **john widgren** » 23 Aug 2009 8:27 am

Thank you all for your kind words. Very much appreciated. As we all know, gigs and tours and opportunities to play are becoming more and more scarce. It has always been my top priority to play,and that remains to be true, but I can say that rebuilding, repairing, teching, and tweeking our marvelous machine has helped to keep me going. The added benefit is that (as in playing music) I am privileged to meet some great folks along the way.

It's always my pleasure to be of service in any way.

Rob Segal · Post by **Rob Segal** » 23 Aug 2009 7:16 pm

Just saw this thread about John. I've had John's advice and service on everything from push-pulls to all-pulls, speakers and cab's, and every steer he's given me has been solid and excellent. He's a master refinisher too. I highly recommend him as a tech; but as others have said, he's also a great player on both necks and a wonderful, helpful teacher of the steel. His location is about an hour outside of NYC and he is well worth the trip. Makes a good sandwich too!

Rob Segal

Bill Lowe · Post by **Bill Lowe** » 23 Aug 2009 8:46 pm

Lets see, John has helped me with my Franklin, Shobud, MSA's, Desert Rose, Emmons, Zum, Rains, as well as some electronic stuff. Great teacher and nice guy. John does it all. When I get stuck and can't figure something out he is always just a phone call away. I learn alot just from watching him work. I would not hesitate to recomend John for anything related to steel guitar. I'm sure you will end up with quality work as well as a new friend.

Bill

Bob Miano · Post by **Bob Miano** » 24 Aug 2009 5:34 am

I never got a sandwich !!

Quality work.....YES.......Sandwich.....NO !!

What's that all about John ?

Bob Miano

Rob Segal · Post by **Rob Segal** » 24 Aug 2009 6:09 am

John is one of those Renaissance men who can and do everything. He is a sculptor, welder, cabinetry finisher, all-purpose fabricator, teacher, musician, kayaker/m'cycle-rider, minor geologist, and among all of this and much more he is a barbecue smoker/chef/short-order cook extraordinaire.

john widgren · Post by **john widgren** » 24 Aug 2009 7:58 am

Thanks again to all. Bob Miano I guess I owe you lunch...oops. This thread is making me hungry for some BBQ. (Brisket of course) MMMMM!

Bob Miano · Post by **Bob Miano** » 26 Aug 2009 4:47 am

just a "technical" bump

Bob Miano · Post by **Bob Miano** » 28 Aug 2009 4:12 am

just another bump

john widgren · Post by **john widgren** » 3 Sep 2009 8:12 am

SSP (Shamless self promotion)

LeRoy Sawyer · Post by **LeRoy Sawyer** » 8 Sep 2009 5:52 am

Just got my LDG back from John and what a great job he did. I would reccomend his work for any job on your steel.
Roy

Bob Miano · Post by **Bob Miano** » 14 Sep 2009 5:20 am

just a 'bump"........................

for anyone needing work done on their guitars,
give John a hollar !

Jonathan Gregg · Post by **Jonathan Gregg** » 25 Sep 2009 9:09 am

Allow me to add my $.02 on this subject -- anyone needing PSG tech work in the New England area would be well advised to contact John. He is highly knowledgeable, conscientious and helpful, and a real gentleman to boot.
If you are lucky enough to take a lesson from him he will show you some great stuff too.

Skip Edwards · Post by **Skip Edwards** » 25 Sep 2009 10:56 am

I've never met John, but anyone who's hip enough to have Mr Sparkle for an avatar is ok by me.
btw, that blonde Emmons you have for sale is just georgous.

Jonathan Lam · Post by **Jonathan Lam** » 25 Sep 2009 11:18 am

I have met john, and hes great. Knows so much, so helpful. He also kills it on the steel.

Steve Alcott · Post by **Steve Alcott** » 25 Sep 2009 11:31 am

"......that blonde Emmons you have for sale is just gorgeous."

It sounds and plays as good as it looks.

The Steel Guitar Forum

"tech-work" for pedal steel by John Widgren in CT.

"tech-work" for pedal steel by John Widgren in CT.

Big 'DITTO'

Thanks friends

John Widgren

oops!

Steel guitar services

John Widgren -- tech and teaching