The Steel Guitar Forum Store 

Post new topic Ethernet Adapter (Coupling)
Reply to topic
Author Topic:  Ethernet Adapter (Coupling)
Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 30 Dec 2008 3:09 pm    
Reply with quote

I need to run 15-20 feet of ethernet cable from a Vonage adapter to my PC, now.

I've got 3 or 4 ethernet cables floating around, ranging in length from 4' to 9'.

I could get a 50' Belkin Ethernet cable from Radio Shack for about $22. Bit of an over-kill, ya think?

But I've been looking around for a simple Ethernet to Ethernet coupling or adapter. Like the phone company makes. To extend all the short cables into one long one.

I'm sure they can't be more than a couple of bucks.

But I had no luck finding any.

Does anyone have a leg up on where and if you can get these? Maybe they don't exist.
View user's profile Send private message Send e-mail

Mitch Drumm

 

From:
Frostbite Falls, hard by Veronica Lake
Post  Posted 30 Dec 2008 4:45 pm    
Reply with quote

Chip:

I don't know anything about the adapter, but you can buy a 15 foot patch cable for 6 or a 25 foot patch cable for 8, including postage, no tax, from numerous dealers on ebay. I have purchased cable this way successfully several times.

22 for 50 feet plus tax is ridiculous, I agree.

Look here:

http://tinyurl.com/8buean
View user's profile Send private message

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Dec 2008 3:33 am    
Reply with quote

By the time you buy the couplers you can buy an Ethernet cable that is long enough. Don't go to Radio Shack or Best Buy, etc as they are usually high $$ for their stuff.

I see 50 ft cables on www.newegg.com for $6.99 and 25 ft for $3.99.
Click Here
View user's profile Send private message Send e-mail

Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 31 Dec 2008 4:46 am    
Reply with quote

Thanks Mitch and Jack,

I'll certainly be checking out your links.

My problem is, I'm anxious to get this long Ethn. cable ASAP, because I'm back with Comcast Broadband for internet and the Vonage phone adapter-setup is still being run by
Verizon DSL. The physical location of the PC and regular phone and incoming Comcast cable make using another long Ethn. cable the only easy way to remedy this situation.

So until I get that cable, I can't close out Verizon, and so I'm now paying for TWO internet services.
Oh Well
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Dec 2008 7:08 am    
Reply with quote

It would be cheaper to just buy a telephone cable extension and that way you could leave the telephone connection where it is and move the Vonage unit close to the router and PC.
View user's profile Send private message Send e-mail

Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 31 Dec 2008 8:40 am    
Reply with quote

Jack,

I'm aware of that, too. But when I talked with Verizon about DSL and my physical layout, they said it's better to extend the Ethn cable than the phone cable. So I already have a 25' ethn. cable for when I went with DSL.

Something about poorer reception with a longer than 6' phone cable.
I don't know?!

Is this bunk? Because I already have a phone cable out to the PC, and if it's bunk, then I'm goin' with the phone cable.

I stopped by a local Radio Shack just this morning in the blizzard, and they do indeed carry an ethn.to ethn. coupler. $6.99 apiece. So that's $14.00 + tax

The best deal for the 25' ethn. cable is Newsegg. $3.99 + $6.99 3-day UPS shipping
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Dec 2008 8:53 am    
Reply with quote

The telephone line can be hundreds of feet, in fact the telephone line from the telephone company to your residence can be over a thousand feet without any repeater (amplifier). Anywhere you go in your residence from the telephone company connection (or in this case the Vonage connection) to your phones is not an issue.
View user's profile Send private message Send e-mail

Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 31 Dec 2008 8:56 am    
Reply with quote

OK Jack.

That's all I needed to hear. I'm gonna get on this soon.

You saved me a few dollars, and TIME.

Thanks again.

CF
View user's profile Send private message Send e-mail

Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 31 Dec 2008 12:49 pm    
Reply with quote

Thanks again all,

The Vonage adapter has been relocated and the phone cable has been extended and all is happy in OZ.

I did have initial problems making the switch-over from DSL to Comcast, however.

I had to get Vonage assistance (excellent help, BTW - clear, unbroken english is very prevalent, thank you)
as their adapter couldn't find the internet. Wound up unpowering both Vonage adapter and Motorola modem for about 3-4 minutes. Re-setting I guess.

But why would one or both get out of wack, simply by making a few moves? Mystery.
Smile
View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 31 Dec 2008 2:19 pm    
Reply with quote

When you moved the Vonage to the different broadband modem, it has to be reset to recognize the device. I know you would think you could just connect it and all is well, but it don't work that way. What you did is what is required. But, glad it all worked, extending the telphone line as you found out didn't make a difference.
View user's profile Send private message Send e-mail

Chip Fossa

 

From:
Monson, MA, USA (deceased)
Post  Posted 1 Jan 2009 4:05 am    
Reply with quote

Very Happy
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP