Formica covered steels look cheap and ugly
Moderator: Shoshanah Marohn
-
- Posts: 427
- Joined: 9 Dec 2008 9:39 am
- Location: British Columbia, Canada
My shiny black mica & polished aluminum Carter looks elegant (to me). Do I drool over lacquer finished figured maple guitars? Yes! Was I willing to wait,& cough up the extra $ required ? No. Would a lacquer guitar sound better or worse ? Maybe. Play better? Almost certainly not.
This whole discussion kind of reminds me of the old graphite vs. split cane debate any old flyfisher would relate to... that could get heated & personal too... I noticed the fishing rods in Ivan Posa's Zum picture which fired a neuron which fired another neuron... you know how it goes.
BTW. Les A., don't forget to notch the edges of those bologna steaks before you fry 'em ... they won't curl up in the pan then. An old Native cooking tip from Jasper Friendly Bear of the Dead Dog Cafe which I'm happy to share with the fobros.
CR.
This whole discussion kind of reminds me of the old graphite vs. split cane debate any old flyfisher would relate to... that could get heated & personal too... I noticed the fishing rods in Ivan Posa's Zum picture which fired a neuron which fired another neuron... you know how it goes.
BTW. Les A., don't forget to notch the edges of those bologna steaks before you fry 'em ... they won't curl up in the pan then. An old Native cooking tip from Jasper Friendly Bear of the Dead Dog Cafe which I'm happy to share with the fobros.
CR.
Excel Superb U12, MIJ Squier tele, modified Deluxe Reverb RI, Cube 80XL, self built acoustics & mandolins
Les Anderson
I get my bologna sandwiches at this Deli here that can't be beat.
When your headed this way I’ll order up a couple of dozen.
You don't have to bring a Formica Steel I already got a couple here. Each of these Steels has the same number of knee levers as the number of teeth on the front row at a Willy Nelson Concert, Three.
If you need a Crawford cluster bring your own.
Email me when you’re gettin ready to come this way and I’ll reply with directions.Missouri isn't all that far away for me to travel to share and partake in a fried bologna sandwich
I get my bologna sandwiches at this Deli here that can't be beat.
When your headed this way I’ll order up a couple of dozen.
You don't have to bring a Formica Steel I already got a couple here. Each of these Steels has the same number of knee levers as the number of teeth on the front row at a Willy Nelson Concert, Three.
If you need a Crawford cluster bring your own.
-
- Posts: 651
- Joined: 16 Oct 1999 12:01 am
- Location: Lake Charles, LA USA
-
- Posts: 651
- Joined: 16 Oct 1999 12:01 am
- Location: Lake Charles, LA USA
I will add one last thing before I get off this topic. During the course of conversation about the necks, this builder brought out a cabinet (from an older guitar) that had the neck removed. There was a rippling on the mica due to cabinet stress. His comment was, "Picture in your mind what this would have done to a wood cabinet." It left an indelible impression on me.
I never studied physics, nor do I know all of the ins & outs of guitar building. As I stated before, I have heard both wood and mica guitars with tone to die for. I am simply providing food for thought for some that may want to experiment further.
Joe Rogers
I never studied physics, nor do I know all of the ins & outs of guitar building. As I stated before, I have heard both wood and mica guitars with tone to die for. I am simply providing food for thought for some that may want to experiment further.
Joe Rogers
- Rich Peterson
- Posts: 893
- Joined: 8 Dec 2008 8:21 pm
- Location: Moorhead, MN
Show Stopper
So....
How big a cover charge would you pay to look at a lacquer guitar?
How big a cover charge would you pay to look at a lacquer guitar?
- John Drury
- Posts: 2026
- Joined: 23 May 1999 12:01 am
- Location: Gallatin, Tn USA
About all I have learned from this thread is that there are people on this forum that are insensitive enough to call another persons guitar ugly, that no two guys are going to agree on how to build a PSG, and that there is a place in MO where you can get a good fried bologna sandwich. (information that actually could be of use to me at some point)
BTW, Bo, and Les, try the fried bologna and eggs for breakfast, it is divine!
BTW, Bo, and Les, try the fried bologna and eggs for breakfast, it is divine!
John Drury
NTSGA #3
"Practice cures most tone issues" ~ John Suhr
NTSGA #3
"Practice cures most tone issues" ~ John Suhr
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Nope, it was just good common sense. If you advertise you use a "name" product, you must use that product. Formica is a copyrighted term and a trademark. Using a non-tradmarked term instead would allow them to change or substitute another laminate (if they so desired), and not have any legal hassles. Alternative laminates would have been Wilsonart, Nevamar, VTlam, or several others.chris ivey wrote:the emmons co. originally made quite a definite distinction that they didn't use formica...it was 'mica glass'..as i recall...i think it may have been way more musically inclined than a countertop.
Technically, "mica glass" was (and still is) a common (generic) term for the mica mineral sheets used for windows in old woodstoves. But it's not a tradmark or copyrighted term, so there aren't any legal problems.
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Wilson Art
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
- Rich Peterson
- Posts: 893
- Joined: 8 Dec 2008 8:21 pm
- Location: Moorhead, MN
- John Groover McDuffie
- Posts: 1459
- Joined: 16 Feb 2006 1:01 am
- Location: LA California, USA
- John De Maille
- Posts: 2266
- Joined: 16 Nov 1999 1:01 am
- Location: On a Mountain in Upstate Halcottsville, N.Y.
I have a beautiful black lacquer RusLer steel, that, I bought in 1976. It still looks great, except for the dings and scratches gotten during 29 yrs of continuous playing. I cringed at every one of them and it annoyed the hell out of me everytime it happened. In 2005, I bought a new ZumSteel. It's covered in gloss black and blackstone dropped V front with pearl inlay. I don't think a minor bar drop or bump will hurt the finish at all. And that's why I chose mica over lacquered wood. I feel safer knowing that blemishes won't occur as easily. The only problem I have now, is, keeping the chromed parts scratch free and that's not easy either. ARGH !!!!!
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
-
- Posts: 3942
- Joined: 23 Dec 2005 1:01 am
- Location: Maryland, USA
Stu, that last image is pretty enigmatic. The dove of peace, perhaps? Some might say it's poised to make a critical comment!
Although my own aesthetic preferences have been very much on the other end of the spectrum, I must admit that the more I look at your new steel, the more I like it! Not that I'd order the same myself...
Although my own aesthetic preferences have been very much on the other end of the spectrum, I must admit that the more I look at your new steel, the more I like it! Not that I'd order the same myself...
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Brint,That bird loves me...I rescued her from Col.Sanders,It's my peace offering to Richard Burton,I don't want him to think that I dislike him
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
- Scott Howard
- Posts: 702
- Joined: 6 Jul 2001 12:01 am
- Location: Georgetown, TN, USA
- richard burton
- Posts: 3846
- Joined: 23 Jan 2001 1:01 am
- Location: Britain
Scott, the can at the bottom of the picture is dry silicone spray. I spray it on a rag and wipe my steel guitar strings, bar and hands with it. I don't use it on my strat. For my strat I wipe it down, neck, strings, frets and all with talc. The talc usually seats right beside silicone can, I guess somebody borrowed it.
A lot of women come up to the bandstand and talk to me. I suspicion they're attracted to me because after using all that stuff I smell like a freshly talced babies bottom.
A lot of women come up to the bandstand and talk to me. I suspicion they're attracted to me because after using all that stuff I smell like a freshly talced babies bottom.
-
- Posts: 2241
- Joined: 14 Aug 2007 1:06 pm
- Howard Tate
- Posts: 3378
- Joined: 17 Oct 2004 12:01 am
- Location: Leesville, Louisiana, USA, R.I.P.
- Contact:
John Fabian,
thanks for your reply. Yes, Im sure that spraying lacquer does involve using the right equipment and location, which can be costly. I would suspect also that certain environmental laws, etc. would affect the decision to spray vs mica. But with all the mica choices available, even wood grain patterns, Id think that a custie would find something they like, albiet not lacquer. Also, the 1-2 hrs of drying time for polyurethane sure beats the time required for a full mica job + heat clamping and drying time not to mention the final attention to edging, detail, etc.
I thank God every day that we have ol' A.J Nelson here in Nashville. Just picked up Chris Lucker's late 50's cabinet-end permanent D-10 from AJ yesterday. You cant beat him on a Sho-Bud! and he does a fine job on Emmons guitars as well, proof being Dyke Corson's "Halloween Surprise".
While I love the lacquer finishes, my heart belongs to mica for a number of reasons
thanks for your reply. Yes, Im sure that spraying lacquer does involve using the right equipment and location, which can be costly. I would suspect also that certain environmental laws, etc. would affect the decision to spray vs mica. But with all the mica choices available, even wood grain patterns, Id think that a custie would find something they like, albiet not lacquer. Also, the 1-2 hrs of drying time for polyurethane sure beats the time required for a full mica job + heat clamping and drying time not to mention the final attention to edging, detail, etc.
I thank God every day that we have ol' A.J Nelson here in Nashville. Just picked up Chris Lucker's late 50's cabinet-end permanent D-10 from AJ yesterday. You cant beat him on a Sho-Bud! and he does a fine job on Emmons guitars as well, proof being Dyke Corson's "Halloween Surprise".
While I love the lacquer finishes, my heart belongs to mica for a number of reasons
-
- Posts: 1344
- Joined: 18 Jun 2004 12:01 am
- Location: Atlanta, Texas, USA
Howard Tate
I serious about the Vodka but that’s another story that I won’t go into now because I’ve already hijacked this topic earlier with a Bologna sandwich.
Apart from my silliness, this has been a very informative topic.
STU, it is a beautiful PSG and I have no problems with the choice of Formica.
Stu, you might ask Tamara about this. The plain diamond quilted fabric on the pad seems a little too Early American for the PSGs Modern decor.
Howard, I don’t because I always clean up everything with Vodka.Bo, do you ever get a clog in your steel?
I serious about the Vodka but that’s another story that I won’t go into now because I’ve already hijacked this topic earlier with a Bologna sandwich.
Apart from my silliness, this has been a very informative topic.
STU, it is a beautiful PSG and I have no problems with the choice of Formica.
Stu, you might ask Tamara about this. The plain diamond quilted fabric on the pad seems a little too Early American for the PSGs Modern decor.