++++BIG Tuning Wrench---"Grab-N-Tune"++++

Carl Williams · Post by **Carl Williams** » 1 Nov 2008 6:06 pm

If you would like a BIG Tuning Wrench ("Grab-N-Tune"), please send me an email at carlwilliams2@att.net and I'll give you the cost of the wrench, how to pay, etc. Several of the "Masters" now have the BIG Tuning Wrench a.k.a. "Grab-N-Tune". The positive feedback from Forum members who bought this wrench has been great! Please see the photos below of the wrench. The dimensions of this wrench are: Shaft is 1" long and it fits a 3/16" hex tuning nut (See Photos below of the BIG Tuning Wrench and two other smaller wrenches with a 3/16" Allen Wrench)and goes to a depth of 5/16" into the shaft. The Knob is 1.5" in diameter and the turning surface width is 5/8". It's milled out of aluminum. ***If your wrench doesn't fit, return it for a refund of the wrench***Again, if you're interested in one of these wrenches, please email me at: carlwilliams2@att.net ***Our Forum gets a donation from wrench sales as always***

Chris Boyd · Post by **Chris Boyd** » 2 Nov 2008 4:32 am

A fantastic tool from a great guy.....

Carl Williams · Post by **Carl Williams** » 2 Nov 2008 4:53 am

Thanks so much Chris...I was hoping to hear from folks like you who have the wrench. Really appreciate you being my first reply to this new post! Take care my friend and all my best to you...Carl

Jack Ritter · Post by **Jack Ritter** » 2 Nov 2008 1:24 pm

By golly----I got 1 of Carl's big tuners when they first came out and if you want effortless and precise fine tuning , be good to yourself and get one.
I would hate not having mine and I am sure you will not regret getting one.

Jack

Carl Williams · Post by **Carl Williams** » 2 Nov 2008 1:45 pm

Hello Jack,
Appreciate you chiming in about your wrench...I like mine more
every time I pick it up...we all like a bigger/better grip and this wrench has proven to be a winner! Thanks again my friend...Carl

Carl Williams · Post by **Carl Williams** » 3 Nov 2008 4:17 pm

TTT---Thanks for all the emails/inquries about the wrench...Hope to have them by the 20th of Nov...in about two weeks! Carl

John Borchard · Post by **John Borchard** » 4 Nov 2008 9:10 am

I have one of Carl's wrenches and it's SOOOOO much nicer than a nut driver. The large size makes fine tuning a real breeze and it takes up a lot less room in my pack-a-seat. Plus, Carl is a pleasure to do business with.

Thanks, Carl!

John Borchard

Carl Williams · Post by **Carl Williams** » 4 Nov 2008 10:30 am

Hello John,
Your positive testimony is very much appreciated and thanks for your kind words! The positive feedback continues from so many folks who have the wrench. As I've said before, I like mine more and more everytime I "Grab" it! ha Thanks again, Carl

Carl Williams · Post by **Carl Williams** » 5 Nov 2008 3:16 am

First Floor Please...

Carl Williams · Post by **Carl Williams** » 8 Nov 2008 2:44 pm

TTT---Orders are coming in fast and it's very much appreciated! Carl (P.S. I had several steelers get extra wrenches last year to give as Christmas gifts to their Pedal Steel friends)

Carl Williams · Post by **Carl Williams** » 11 Nov 2008 4:06 am

Pat Goodbla · Post by **Pat Goodbla** » 11 Nov 2008 8:40 am

Do you have a 1/4" wrench available?

Kevin Mincke · Post by **Kevin Mincke** » 11 Nov 2008 9:13 am

Thanks Carl....the best

I had mine personalized

Ray Thomas · Post by **Ray Thomas** » 11 Nov 2008 6:55 pm

Carl, already have one, would like another when they become available.

Carl Williams · Post by **Carl Williams** » 12 Nov 2008 3:32 am

Hello Ray,
Good to hear from you and appreciate your "repeat customer" business!

I've sent you a Private Message. Should have wrenches by end of next week...Thanks again, Carl

Carl Williams · Post by **Carl Williams** » 12 Nov 2008 7:04 am

Kevin,
Thanks for your kind post and showing your Big Tuning wrench...A Class Act!

Hope your upcoming holidays are good for you and your family...Keep on pickin'! Carl

Carl Williams · Post by **Carl Williams** » 13 Nov 2008 8:40 am

Bumper...Once again, if you have a Pedal Steel friend and don't know what to get him/her for Christmas, this wrench will fit into their stocking!

P.S. Just make sure they can use a 3/16" wrench...Get it early and maybe they'll be in better tune for those Christmas songs! ha (Trust me, I'll need alot Bigger Wrench than what I'm selling to get completely in Tune--JI or ET for that matter!

Pat Goodbla · Post by **Pat Goodbla** » 14 Nov 2008 4:21 pm

Regarding my earlier post, is 1/4" available?

Carl Williams · Post by **Carl Williams** » 14 Nov 2008 6:33 pm

Hello Patrick,
I'm sorry for the delayed response but I sent you a Private Message (PM) and answered your question...It's probably out there in Cyberspace somewhere...I only have a 3/16" size wrench at this time. Appreciate the inquiry and again my apology. Have a great weekend...Carl

Carl Williams · Post by **Carl Williams** » 16 Nov 2008 3:43 am

Skip Ellis · Post by **Skip Ellis** » 17 Nov 2008 5:15 pm

Carl - did the wrenches arrive? I need one in the worst way.

Carl Williams · Post by **Carl Williams** » 17 Nov 2008 6:13 pm

Hello Skip,
Your timing is on target...my manufacturer called me this afternoon and wrenches are being shipped tomorrow and I "should" have them Thursday, 20 November. I'll be shipping several wrenches out this weekend and I'll be happy to get yours on the way. Please email me at: choctawoaks@cox.net and I'll send you specific info on cost, payment,etc. Thanks for your inquiry...Carl

Carl Williams · Post by **Carl Williams** » 19 Nov 2008 3:13 am

Carl Williams · Post by **Carl Williams** » 19 Nov 2008 6:42 pm

Order your wrench now while they're in stock! Thanks for all the early orders...

Carl

Carl Williams · Post by **Carl Williams** » 20 Nov 2008 2:37 am

The Steel Guitar Forum

++++BIG Tuning Wrench---"Grab-N-Tune"++++

++++BIG Tuning Wrench---"Grab-N-Tune"++++

Thanks!

Better Grip & Fine Tuning

Big Tuning Wrench--You'll Like It!

Well worth it!

Thanks!

Get A Better Grip...

Bump

Tuning Wrench

Thanks

Thanks

Christmas Gift Idea?

Wrench Size

Perfect Timing!

Wrenches In Stock