Tele style B-Bender guitar and some other parts.
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact:
Tele style B-Bender guitar and some other parts.
I still have one B-Bender Tele style with a Bill Lawrence pup in the bridge, and compensated saddles.
This is a brand new guitar, and I just put it back together today. It started as a Stagg T-300. And I put a bender in it. Replaced the saddles with compensated saddles, and replaced the bridge pickup.
I think Dennis is going to take this one.
I can make another one though... and for $450 it's a good deal.
I also have a Baritone Tele with a bender I put in it.
I'll part it out, The neck cost me $220 from Warmoth. So I'll sell it for that, with the tuners installed...
And the Body loaded with the bender I'll let go for $350. It's a Squier Affinity body.
I'll post pics of it when I get a chance.
If someone wants the whole guitar, I'll let it go for $675 complete with the stock pups.
This is a brand new guitar, and I just put it back together today. It started as a Stagg T-300. And I put a bender in it. Replaced the saddles with compensated saddles, and replaced the bridge pickup.
I think Dennis is going to take this one.
I can make another one though... and for $450 it's a good deal.
I also have a Baritone Tele with a bender I put in it.
I'll part it out, The neck cost me $220 from Warmoth. So I'll sell it for that, with the tuners installed...
And the Body loaded with the bender I'll let go for $350. It's a Squier Affinity body.
I'll post pics of it when I get a chance.
If someone wants the whole guitar, I'll let it go for $675 complete with the stock pups.
Forrest Lee Jr.
-
- Posts: 2510
- Joined: 5 Apr 2008 6:20 pm
- Location: the cornfields
bender
I will take it thanks again
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact:
Hey Ken,
Let me know if you want me to put one in for you. I have to do 2 more for John Bohlinger, and then I can can do another one, so it'll be a week or two before I can get to it.
I'll be at home for the next couple weeks helping my dad get better. So I'll be off the road and have time to do a few benders.
The Nashville 1000 is sold, As is the Guitar in the picture, The 400 is pending...
I still have a few more peices of gear I'd like to sell. If you want any of it, please send me an e-mail at ForrestLeeJr@hotmail.com
As with everything sold, If I do a bender for someone, I'll send the donation to the forum.
I still have an Ovation stereo acoustic electric circa 1986, case with the case, little bit beat up, but it sounds great acoustically and plays like butter. The electronics dont work, and I havent tried to figure that out yet.
I have a new Delta Jumbo cutaway acoustic, used for one radio tour, and it's in a brand new hard shell case. Very nice guitar.
I have a Galveston electric Dobro I'll sell cheap $175, it's a round neck, but I've got a nut cover... raises the strings like a square neck etc... I'll add the case for $25.
Let me know if you want me to put one in for you. I have to do 2 more for John Bohlinger, and then I can can do another one, so it'll be a week or two before I can get to it.
I'll be at home for the next couple weeks helping my dad get better. So I'll be off the road and have time to do a few benders.
The Nashville 1000 is sold, As is the Guitar in the picture, The 400 is pending...
I still have a few more peices of gear I'd like to sell. If you want any of it, please send me an e-mail at ForrestLeeJr@hotmail.com
As with everything sold, If I do a bender for someone, I'll send the donation to the forum.
I still have an Ovation stereo acoustic electric circa 1986, case with the case, little bit beat up, but it sounds great acoustically and plays like butter. The electronics dont work, and I havent tried to figure that out yet.
I have a new Delta Jumbo cutaway acoustic, used for one radio tour, and it's in a brand new hard shell case. Very nice guitar.
I have a Galveston electric Dobro I'll sell cheap $175, it's a round neck, but I've got a nut cover... raises the strings like a square neck etc... I'll add the case for $25.
Forrest Lee Jr.
I really liked Bill's Bender, It was a long throw. He lined the inside with black felt, all stainless parts. Do you do a long throw, felt lining and perhaps a smoke cover instead of clear?
Let me know! Your bender looks just like the one Bill did!! It was a nice guitar. I sold it and miss it a lot.
My 1983 Tele is my go to guitar and I would like to do one in it.
Let me know how much and if you could do some of the things I listed
Enjoyed a lot of your You Tube videos, too. You are a fine musician!!
Let me know! Your bender looks just like the one Bill did!! It was a nice guitar. I sold it and miss it a lot.
My 1983 Tele is my go to guitar and I would like to do one in it.
Let me know how much and if you could do some of the things I listed
Enjoyed a lot of your You Tube videos, too. You are a fine musician!!
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact:
-
- Posts: 2510
- Joined: 5 Apr 2008 6:20 pm
- Location: the cornfields
bender
thanks forest got it today great guitar and nice bender system great guy to deal with
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact:
-
- Posts: 539
- Joined: 7 Feb 2007 4:54 pm
- Location: South Carolina, USA
Hey Forrest
Are you the one that I have seen give lessons on Youtube?
If you are...I must say that I am impressed. As Bill and Ted would say.....'most excellent.'
The Baritone tele is just the name brand?
Dave
If you are...I must say that I am impressed. As Bill and Ted would say.....'most excellent.'
The Baritone tele is just the name brand?
Dave
-
- Posts: 6870
- Joined: 20 Apr 2002 12:01 am
- Location: Over there
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact:
I had a Baritone neck bolted on it for the last 3 years... thats all. The body was a standard Squier body.
I have another complete Tele with the bender, just like The guitar Dennis bought. And on the Forum I'll sell it for $450 plus shipping, it's on Ebay right now for $650.
The "Baritone" body has been sold... the only thing that made it a Baritone, is the neck I had on it...
I still have the neck, So Maybe I'll bolt it on one of these Bender bodys and sell it.
Anyway, Thanks for helping clean out my studio.
Forrest
I have another complete Tele with the bender, just like The guitar Dennis bought. And on the Forum I'll sell it for $450 plus shipping, it's on Ebay right now for $650.
The "Baritone" body has been sold... the only thing that made it a Baritone, is the neck I had on it...
I still have the neck, So Maybe I'll bolt it on one of these Bender bodys and sell it.
Anyway, Thanks for helping clean out my studio.
Forrest
Forrest Lee Jr.
- Jani Peter Sandvik
- Posts: 533
- Joined: 23 Apr 2007 6:15 am
- Location: Kolppi Finland
- Contact:
looks like a hammond m100 behind the dobro
Sandwich Productions
https://www.facebook.com/sandwichproducts/
https://www.facebook.com/sandwichproducts/
-
- Posts: 60
- Joined: 24 Oct 2003 12:01 am
- Location: Waverly, TN
- Contact: