One potentially stupid question

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Post Reply
Mike Meadors
Posts: 21
Joined: 19 Apr 2008 12:23 pm
Location: Florida, USA

One potentially stupid question

Post by Mike Meadors »

This may sound idiotic, but I don't know the answer.
If I have a 10 string guitar, is there some reason I couldn't or wouldn't want to set up, for example, an open E tuning on 5 of the strings and a C6th on the other 5 (leaving out a bass string on each, of course). Would the string tensions and diameters throw off something or create too much tension somewhere, or are there other obvious reasons why I wouldn't even want to bother trying such a thing?
Thanks.
User avatar
Papa Joe Pollick
Posts: 1968
Joined: 4 Mar 2005 1:01 am
Location: Swanton, Ohio

Post by Papa Joe Pollick »

Mike,are you talkin about a PSG or lap steel?
On a PSG you might have a problem getting pedals and knee levers working right.Dunno..PJ
User avatar
Doug Beaumier
Posts: 15642
Joined: 4 Aug 1998 11:00 pm
Location: Northampton, MA
Contact:

Post by Doug Beaumier »

It is possible, but I think you would gain More with one 10-sting tuning. 10 strings allows you to take advantage of a wider range of notes and chord possibilities than two different 5-string tunings IMHO. I actually tried this once, and I felt like I had two incomplete 5-string tunings on my guitar. A combination tuning, like C6/A7 would work well, but I have my doubts about two unrelated 5-string tunings on a 10-string guitar. Just my opinion.
Mike Meadors
Posts: 21
Joined: 19 Apr 2008 12:23 pm
Location: Florida, USA

Post by Mike Meadors »

I just bought a 1940 Rick 10-string lap steel (B model I believe), Bakelite, etc. and am wondering
if I could split the strings like I explained in my earlier post. I don't want to go around with 2 guitars and would like to use a C6th and also an open E tuning on the same guitar, if possible, because both have good things to offer, but it was just a crazy thought and I thought I'd throw it out to the group to see if I'm nuts or not.
Eddie Cunningham
Posts: 1075
Joined: 10 Nov 2006 1:01 am
Location: Massachusetts, USA

1947 Tuning = 4 - 4 string chords ?? !!!

Post by Eddie Cunningham »

Hi Mike & Doug , Back in 1947 when I bought my first National D-8 console steel Valco included a tuning chart for 8 string tunings and one was a special tuning some radio-recording star from Chicago used that had a 4 string major and a 4 string 7th chord on one neck and then diminished and augmented 4 string chords on the other neck. There was a minor chord mixed in there also somehow ?? It didn't make any sense to me then and still doesn't !! But I guess you could split a 10 string neck into two 5 string non-pedal tunings if you wanted ??!! It would be possible !! Eddie "C" ( the old non-pedal geezer )
Bill Creller
Posts: 3740
Joined: 29 Oct 2002 1:01 am
Location: Saginaw, Michigan, USA (deceased)

Post by Bill Creller »

What the heck, give it a try. You have nothing to lose but a bit of time. Then you will know if it's a usable set up, or not.
Charles Davidson
Posts: 7549
Joined: 9 Jul 2005 12:01 am
Location: Phenix City Alabama, USA

Post by Charles Davidson »

Seems that would work on a 12 string,would have two six string tunings at your finger tips.DYKBC.
Hard headed, opinionated old geezer. BAMA CHARLIE. GOD BLESS AMERICA. ANIMAL RIGHTS ACTIVIST. SUPPORT LIVE MUSIC !
User avatar
Michael Johnstone
Posts: 3841
Joined: 29 Oct 1998 1:01 am
Location: Sylmar,Ca. USA

Post by Michael Johnstone »

E13 will probably give you the most bang for the buck.It has all the intervals as a C6 and then some.Plus you can play any tuning in any key so chose a comfortable root key like E, A or C and go with a 13th tuning.Max intervallic combinations is what you want.If you stick with it long enough you'll figure that out for yourself anyhow.
Post Reply