Dumb Stringmaster question

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Post Reply
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Dumb Stringmaster question

Post by Jon Light »

I play PSG with picks slightly (but not extremely) extended. Minor claws but not more than ~~1/8" beyond the fingertip.
On the Stringmaster this results in clacking on the fretboard, the SM having strings considerably lower than any other steel I've got, pedal or non.

The dumb question--do all Stringmaster players adjust to this string height thing and pick cleanly or do some play with pick clatter and consider it a 'goes with the territory' thing?

Is it simply a matter of: good players pick clean, hacks clack?
User avatar
Bob Hoffnar
Posts: 9244
Joined: 4 Aug 1998 11:00 pm
Location: Austin, Tx
Contact:

Post by Bob Hoffnar »

Jon,
My bakelite Ricky has the same string height as my Stringmaster. You get used to it after a bit and the clacking stops.
Bob
User avatar
basilh
Posts: 7694
Joined: 26 May 1999 12:01 am
Location: United Kingdom
Contact:

Post by basilh »

Why are you picking DOWNWARDS and THAT far from the bridge ?
Rick Collins
Posts: 6006
Joined: 18 May 2000 12:01 am
Location: Claremont , CA USA

Post by Rick Collins »

...probably too agressive on string attack, Jon.

One possible approach __ bend a separate set of finger picks just for the Stringmaster. Each guitar has it's own "feel" anyway. You will soon become accustomed to the new picks. Curve them back more toward the palm.
Clyde Mattocks
Posts: 2992
Joined: 26 May 2005 12:01 am
Location: Kinston, North Carolina, USA

Post by Clyde Mattocks »

The closeness of the strings to the fretboard on a
Stringmaster does present a problem for some. I
have had a couple brought to me for a simple mod.
You just insert 1/8" aluminum strips under the bridge and nut.

You will have to drill two holes in the strip for the nut so the mounting screws can pass thru. The strip for the bridge is simply slid under and held in place by string pressure. There is enough adjustment in the pickup to raise it to the proper height. I can't tell that it makes any difference in
the tone of the guitar.
LeGrande II, Nash. 112, Harlow Dobro
Walter Thut
Posts: 28
Joined: 6 Oct 2000 12:01 am
Location: Switzerland

Post by Walter Thut »

Jon,
I had the same Problem with my stringmaster D8,then a Frind of mine made 2 "Raisers" for my guitar.Now that i'm selling my Stringmaster you can Have the "Raising kit" if you are interested in.

Walter T
Image
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

Thanks guys. Hey Walter--thank you for the offer. I appreciate it. But my objective and I believe my best approach will be to become accustomed to picking this guitar properly rather than adapting it to my improper technique. Now that I have my answer (that no, it is not standard to clack & clatter) I can proceed with confidence and determination.
User avatar
basilh
Posts: 7694
Joined: 26 May 1999 12:01 am
Location: United Kingdom
Contact:

Post by basilh »

Good thinking Jon, that's the way to go, for sure..
Basil
User avatar
Alan Brookes
Posts: 13218
Joined: 29 Mar 2006 1:01 am
Location: Brummy living in Southern California

Post by Alan Brookes »

Jon Light wrote:...my best approach will be to become accustomed to picking this guitar properly rather than adapting it to my improper technique...
I've been finding this out the hard way over the years. There's always a reason why a particular style of playing evolves and becomes standard. I think it hinges around two heads are better than one, and a multitude of heads is better still...:D
Post Reply