whats your day job ?

Randal Smith · Post by **Randal Smith** » 29 Dec 2007 3:13 pm

I work for Epiphone as a guitar inspector. It involves checking each guitar for structural and cosmetic problems, then doing a quick setup. The quota is 50 guitars per day. I average more than that.

Occasionally, I work in the repair dept., doing such things as repairing frets, replacing damaged frets, gluing loose frets, leveling frets, crowning frets and deburring sharp fret ends.

Maybe that's why I like steel guitars. No fret problems!

Oh, yeah. I'm also music director at church.

Brian Edwards · Post by **Brian Edwards** » 29 Dec 2007 9:53 pm

Economist at national laboratory.

James Martin (U.K.) · Post by **James Martin (U.K.)** » 30 Dec 2007 2:04 am

Terry, That's probably the reason for all those accidents I had! James.

Tony Glassman · Post by **Tony Glassman** » 30 Dec 2007 2:26 am

Physician (Rehabilitation Medicine)

Tore Blestrud · Post by **Tore Blestrud** » 30 Dec 2007 3:42 am

75 % COP
25 % steel play

Larry Scott · Post by **Larry Scott** » 30 Dec 2007 5:02 am

David Wright wrote:Brick~Mason. I'll lay about anything

Really?

Jim Taylor · Post by **Jim Taylor** » 30 Dec 2007 8:52 am

I've worked in the computer field for 43 years. I started as a hardware development engineer, then later as a hardware manager and then a Manufacturing manager. In the “twilight” of my career I am in new products introduction. I integrate the Mfg requirements into the Engineering schedules and then manage the MFG side until the new product is in stable production. I hope to retire in a year or two, but I have to learn how to keep from spending so much money.

Dale Gray · Post by **Dale Gray** » 30 Dec 2007 12:03 pm

Worked offshore as a communications tech for Motorola until the bottom fell out, plus the cost of leasing 3 Bell Jet Rangers, Retired Law Enforcement, now drive school bus, pick guitar, and fly model rockets.

Bob Knetzger · Post by **Bob Knetzger** » 30 Dec 2007 12:19 pm

Toy designer.

First on staff at Mattel in the 70s, then for the last twenty five years as an independent toy inventor. When I'm lucky I license my inventions to toy companies and get paid a royalty based on sales. Even more 'feast or famine' than the music biz. (Please, no Chinese lead toy jokes!)

BTW, there was another "toy designer/steel guitarist/banjo player" that you ALL know...any guesses?

-It's Winnie Winston!

Alan Brookes · Post by **Alan Brookes** » 30 Dec 2007 12:26 pm

Randal Smith wrote:I work for Epiphone as a guitar inspector....

That sounds like a great job. I'm envious...

Alan Brookes · Post by **Alan Brookes** » 30 Dec 2007 12:28 pm

Larry Hamilton wrote:Kenny, Yes I have run the GE dash 8 locomotives. BNSF has many in their fleet of locomotives..

That also sounds like a great job. Again, I'm envious...

Alan Brookes · Post by **Alan Brookes** » 30 Dec 2007 12:34 pm

Terry Kinnear wrote:Hey James, I think your driving on the wrong side of the road. your steering wheel is on the wrong side of the car. nice car.Tk

During the 1939-45 war there were thousands of US troups in Emgland, and teaching them to drive on the left was not always successful. I'm reminded of the 60s joke, when Idi Amin declared that he was going to change his country from left-hand to right-hand driving, but in order to reduce the confusion, he would have trucks and buses drive on the right, and the rest of the country drive on the right a year later. The result was complete pandominium.

Joe Stoebenau · Post by **Joe Stoebenau** » 30 Dec 2007 4:40 pm

James Cann wrote:Adjunct English faculty, Glendale Community College.

Hey James, I went to Glendale Comm. College back in '98 I think. I was in the aviation mechanic program. It was a very good program with great instructors. Is John Cassel still there? He was the head of the aviation program back then. If he is, tell him I said hello and give him my email.
Jam On,
Joe Stoebenau

Geoff Cole · Post by **Geoff Cole** » 30 Dec 2007 5:03 pm

At present I am a maritime traffic control officer for Darwin Harbour Port Corporation ,Northern Territory ,Australia. And it does have it's moments.

Bill Moran · Post by **Bill Moran** » 30 Dec 2007 5:18 pm

I'm a piggybacker ! I will explain if anyone cares.
Drive'em out, sit'em down, fly back !!
I would rather be hunting .

$:\$ $:\$ $:\$

KENNY KRUPNICK · Post by **KENNY KRUPNICK** » 30 Dec 2007 6:19 pm

Larry, I like the GP-9 Locomotives too.

I was into the "HO" scale model railroads for awhile.

Steve Wilson · Post by **Steve Wilson** » 30 Dec 2007 8:42 pm

Great topic! Many interesting occupations...

I work as the Director of Marketing Communications for a small family winery in California's Santa Clara Valley. Evenings and weekends I am the guitar repair tech for a local music store. I figure I have worked on over 1,500 guitars and one pedal steel - mine! I have been employed in the wine industry for 34 years. I once considered changing occupations but then I found out some employers frown on tasting wine on the job and maintaining a wine cellar in your office.

Larry Hamilton · Post by **Larry Hamilton** » 30 Dec 2007 9:02 pm

Kenny, I can't think what a GP-9 is but I think it is a switch engine.

Yeah, railroading beats working for a living. I have a life size toy to play with.

David Wright · Post by **David Wright** » 30 Dec 2007 9:48 pm

Larry,
yep, brick, block, stone, glass block...

David Doggett · Post by **David Doggett** » 30 Dec 2007 11:50 pm

DW, that barbecue pit is a real work of art. It reminds me of one of the jobs I had as a concrete form carpenter in Nashville in the '70s. It's an artistic concrete fountain that sits over in the middle of the student commons building of Vanderbilt U. One ole boy and me built the whole thing (except for the plumbing). It's still there as far as I know. I also worked from the ground up on the 11-story municipal parking garage on top of the hill downtown. That's one of the neat things about construction. I took my kids to the top of the parking garage and told them that me and a couple of other ole boys formed every column in that building. After work I'd go home and take a nap, and get up and go play Dobro and steel in the Broadway Club. Those were the days.

Dave Seddon · Post by **Dave Seddon** » 31 Dec 2007 12:43 am

I cut and ship sheet metal to e-bay customers, boring, but keeps me in strings and things! Dave.

Terry Kinnear · Post by **Terry Kinnear** » 31 Dec 2007 9:39 pm

most everybody, who plays steel guitar,has alot of brain power. If they can tune it and play some songs. good or indifferent. most people,cant get that far. Steel players,in my opinion .are a great bunch of guys, who are great thinkers,and love a good challenge. Tk

Steve Norman · Post by **Steve Norman** » 1 Jan 2008 12:54 am

man I need a better job after reading all this,,
whos hiring?

Terry Kinnear · Post by **Terry Kinnear** » 1 Jan 2008 5:35 am

I know, Im trying to get a job ,with Bo Leggs. he is over paid, for the job he does. Tk

Tony Dingus · Post by **Tony Dingus** » 1 Jan 2008 6:26 am

I'm a traffic maintance worker. Installing and maintaining signs and road markings. During the summer I'm on back of a road stripping truck. You got it,"Crooked Lines", just ask Mike Archer and I don't drink. Sessions are my part time work.

Tony

The Steel Guitar Forum

whats your day job ?

Day job?

day job