steel guitar show in daleville alabama

Upcoming steel guitar shows, concerts, jam sessions, club dates, etc.

Moderator: Dave Mudgett

Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

steel guitar show in daleville alabama players list update

Post by Jack Goodson »

the show is confirmed on december 2nd at the vfw in daleville alabama...here is a list of confirmed players at this time, if you would like to play on the show let me know asap...mr. don helms will be the featured artist, as most of you know this will be about 15 miles from his home town (new brockton, al.).jack goodson,(georgetown, ga.) pee wee dutton (montgomery al.) ernie cawby (liveoak, fl.) larry bullock (georgia) don lynch (prattville, al.) shorty smith (columbus ga.) roger crawford (georgia) jim walker (florida) clyde bloodsworth (alabama) gordon dodson (ozark, al.)the show will start at 12/pm and end around 6/pm (sunday afternoon).i will update the list as others let me know....thanks jack (barney miller from covington ga. also larry knighton from columbia alabama,have been added to the list.)everything is looking good.... thanks jack
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

updated list

Post by Jack Goodson »

updated players list....thanks jack
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

update

Post by Jack Goodson »

i have confirmed another player to the show, he is lamar morris. just in case anyone does'nt know lamar, he was hank jr's lead guitar player and front man for the bama band for over twenty years. he will be performing with mr. don helms on his part of the show. also if anyone else would like to be a part of the show please let me know asap as i will post a schedule in the next few days......thanks jack
User avatar
Jim Walker
Posts: 1793
Joined: 31 Dec 2000 1:01 am
Location: Headland, AL

Post by Jim Walker »

Hey Jack! Looks like things are coming together! Only a few weeks away now.

JW
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

players schedule

Post by Jack Goodson »

here is the schedule (these are all confirmed players) 12/pm don lynch
12:30 ernie cawby
1/pm gordon dodson
1:30 shorty smith
2/pm pee wee dutton
2:30 clyde bloodsworth
3/pm roger crawford
3:30 don helms and lamar morris
4:15 jack goodson & sonny purdum
5:00 barney miller
5:30 larry knighton
6:00 jack conyer
6:30 jim walker
I am changing the schedule a little (hope no one objects to this) but i talked with sonny purdum yesterday and he is coming from nashville after he plays a club in printers alley saturday night. for you that do not know sonny, he played the opry and on the road with several artist such as connie smith, jean shepard jack green, etc etc. i changed my place on the list so sonny and i can play together.....thanks jack
[/list][/code][/quote]
Last edited by Jack Goodson on 22 Nov 2007 4:53 pm, edited 1 time in total.
James Harrison
Posts: 201
Joined: 5 Jun 2007 6:58 am
Location: New Brockton, Alabama, USA

Post by James Harrison »

Hi Jack:
I don't know how I missed this Topic until tonight. I think this is what this area needs. Several asked where Daleville, Alabama is located. It is in Southeast Alabama at the South Gate of Fort Rucker, Al., about 20 miles west of Dothan Al. and about 7 miles east of Enterprise,Al. on Hiway US 84 4 lane. The VFW is about 1/4 mile east of the traffic light on Hiway US 84 in Daleville, Al.
Jack if there is any I can help you with this show, let me know as I am available most any time. Good luck with the show.
James
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

sell or trade

Post by Jack Goodson »

forgot to mention also that we will have space available if anyone has anything you might want to sell,swap, trade etc. james: i am sorry that i havent called you i have been on the phone for about two weeks. jim: am also looking forward to hear you play. ....thanks jack
User avatar
Ernest Cawby
Posts: 3716
Joined: 6 Aug 2003 12:01 am
Location: Lake City, Florida, USA, R.I.P.
Contact:

For Sale

Post by Ernest Cawby »

Jack I will have the Profex 2 for sale, it has been updated, Mod and batteryless chip, all the presets are there 120 of them ,Hughey, Sasser, Newman, Green, Mooney, Beavers, all the top Pros, it is set the way they set theirs or the way their amps are set up. That is what the profex is all about.
I am selling this to buy the Fender 1000. Jack you know how it is sell one to buy another.
The Silvertone and Boss has been sold.
I also have a alesis SR 16 Drum machine, has been prograed with 3/4 time track, the machine does not come with any 3/4 time tracks built in. for $110.00, with power supply. It is very new has not been used hardly at all.

ernie
User avatar
Roger Crawford
Posts: 5264
Joined: 10 Sep 1999 12:01 am
Location: Griffin, GA USA

Post by Roger Crawford »

If someone can post an address for the VFW, I'll do a MapQuest to find it!
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

directions

Post by Jack Goodson »

roger: i dont know the actual address. but if you come to dothan alabama then go west on highway 84. it is about 20/miles. the vfw is on the left of highway 84 just before you get to the one and only redlight....thanks jack
User avatar
Ken Fox
Posts: 9620
Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA

Post by Ken Fox »

Looks like Ruth and I will be there. Ruth's house is in Daleville and on the market for sale. We need to check on it and I have a doctor's appointed on Monday there as well.


The VFW is just a few miles from the house on Hwy 84. So we will see you there!!
User avatar
Jim Walker
Posts: 1793
Joined: 31 Dec 2000 1:01 am
Location: Headland, AL

Post by Jim Walker »

Hey Ken, bring your tools. I need ya to swap out the busted Gain pot on my amp. 8)

See ya soon!


JW
Show Pro D10, Session 400
User avatar
Ken Fox
Posts: 9620
Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA

Post by Ken Fox »

Will do her for you, Jim!. Just remind me again before we take off and I will load up some basic shop tools.

Did you get the pot yet???
User avatar
Jim Walker
Posts: 1793
Joined: 31 Dec 2000 1:01 am
Location: Headland, AL

Post by Jim Walker »

yes sir, it's right here.
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

ken fox mod's

Post by Jack Goodson »

ken: you are welcome to bring your mod stuff, we will get you a space........thanks jack
User avatar
Ken Fox
Posts: 9620
Joined: 20 Apr 2001 12:01 am
Location: Nashville GA USA

Post by Ken Fox »

Sounds like a good idea! I will have mods kits for N-112 and N-1000 for sale. I can install those at the show as well, it is pretty easy to do.

I could also pick up amps for the "intense mod" (Nashville 400, Vegas 400), the Brad Sarno mod (Session 400 and LTD400) and also tube amps in need of repair, if applicable. That would save folks shipping to the shop.

I will be able to do the battery-less mods as well, unless I run out of chips. I have 12 left right now and hope to order more next week, if they have any left.
User avatar
Ernest Cawby
Posts: 3716
Joined: 6 Aug 2003 12:01 am
Location: Lake City, Florida, USA, R.I.P.
Contact:

hi

Post by Ernest Cawby »

Jack send me an exact address to the show and I can find it, on my GPS.

ernie
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

directions to show

Post by Jack Goodson »

ernie: come to dothan alabama and come around the circle on the west side to highway 84 west, turn left on 84 west and you will be in daleville in about 20 minutes. it is on the left side of 84 west just before you get to the only red light in dalevile on highway 84 west.....
James Harrison
Posts: 201
Joined: 5 Jun 2007 6:58 am
Location: New Brockton, Alabama, USA

Post by James Harrison »

I am bumping. Since this is the first show, we need lots of exposure.
James
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

UPDATED PLAYERS LIST

Post by Jack Goodson »

updated players list....thanks jack
Shorty Smith
Posts: 815
Joined: 23 Apr 2004 12:01 am
Location: Columbus, Georgia, USA

Post by Shorty Smith »

Looking forward to seeing my buddy Sonny again, been a long time, Shorty
User avatar
Lana Rosselli
Posts: 1647
Joined: 29 Nov 2004 1:01 am
Location: St. Louis, Missouri, USA

Post by Lana Rosselli »

Hey Jack - will there be any accordions on display? HA!

The show will be great - Don Helms is headlining! Wish I could join ya'll but once again I'll miss my good friend Jim Walker. And that Roger fella who plays up a storm. Have a great time!!!
Miss Lana
SteelRadio.com
Jack Goodson
Posts: 4773
Joined: 21 Mar 2005 1:01 am
Location: new brockton,alabama (deceased)

accordian

Post by Jack Goodson »

lana: we wont have room for the accordian this time. martha said that she really wishes you could be there to help her with the emceeing of the show. this will be her first time. she also said the butterflies wings will be as big as the accordian....thanks martha and jack
User avatar
Howard Tate
Posts: 3378
Joined: 17 Oct 2004 12:01 am
Location: Leesville, Louisiana, USA, R.I.P.
Contact:

Post by Howard Tate »

Jack, I wish I could be there but I just can't make it. BTW,at a Gulfport show, I kept seeing someone and thinking I should know him. It wasn't until later I realized it was you. I'm sorry I didn't seek you out and speak. Good luck with the show.
User avatar
Lana Rosselli
Posts: 1647
Joined: 29 Nov 2004 1:01 am
Location: St. Louis, Missouri, USA

Post by Lana Rosselli »

Oh my, if Martha's going to emcee, who's going to make the coffee? HA! I would love to emcee a show with Martha. She'll do just fine I'm sure but if she gets stuck, have her call me, I'll help her out over the phone!

Love you guys and see ya soon!
Miss Lana
SteelRadio.com
Post Reply