Newbie question
Moderator: Shoshanah Marohn
-
- Posts: 16
- Joined: 19 Sep 2007 12:21 pm
- Location: Connecticut, USA
- Contact:
Newbie question
Hello all! Longtime lurker here finally registered to the new site. I have a question about arthritis and playing pedal steel. I have arthritis and carpal tunnel. Currently I do not own a psg, but have been itching to get one. I play guitar and slide, and it gets tougher and tougher to play with my hands and wrists the way they are. I still play out quite a bit and rehearse 2x a week, but I am becoming more and more limited and more sloppy.
- How rough is playing pedal steel on the hands/wrists?
- I am sure that proper positioning and posture helps, but what advice do you all with similar ailments have?
- I was hoping to find a cheaper used or maybe go the Carter Starter, then I thought about wrist rests (if that's what the are called). Do I def need a psg with a wrist rest?
Thanks in advance!
Frank
- How rough is playing pedal steel on the hands/wrists?
- I am sure that proper positioning and posture helps, but what advice do you all with similar ailments have?
- I was hoping to find a cheaper used or maybe go the Carter Starter, then I thought about wrist rests (if that's what the are called). Do I def need a psg with a wrist rest?
Thanks in advance!
Frank
- Calvin Walley
- Posts: 2557
- Joined: 11 Sep 2003 12:01 am
- Location: colorado city colorado, USA
hi Frank
i think what you are looking for is an SD-10
it has what you might be calling a wrist pad
it is a single neck on a double body with pad where the 2nd neck would normally be hence the term sd-10 s (single neck) D (double body) 10 (10 strings)
with the problems you stated i would think that a used pro model would be your best bet because they can be adjusted to the point that they require much less movment of the pedals and knee levers than a student model, however having said that,
if you must get a student model one of the best by far is the Zum stage one. it is very close in price to other student models and comes close to being a pro model
i think what you are looking for is an SD-10
it has what you might be calling a wrist pad
it is a single neck on a double body with pad where the 2nd neck would normally be hence the term sd-10 s (single neck) D (double body) 10 (10 strings)
with the problems you stated i would think that a used pro model would be your best bet because they can be adjusted to the point that they require much less movment of the pedals and knee levers than a student model, however having said that,
if you must get a student model one of the best by far is the Zum stage one. it is very close in price to other student models and comes close to being a pro model
proud parent of a sailor
Mullen SD-10 /nashville 400
gotta love a Mullen!!!
Guitars that i have owned in order are :
Mullen SD-10,Simmons SD-10,Mullen SD-10,Zum stage one,Carter starter,
Sho-Bud Mavrick
Mullen SD-10 /nashville 400
gotta love a Mullen!!!
Guitars that i have owned in order are :
Mullen SD-10,Simmons SD-10,Mullen SD-10,Zum stage one,Carter starter,
Sho-Bud Mavrick
- Stan Paxton
- Posts: 1223
- Joined: 25 Sep 2006 12:01 am
- Location: 1/2 & 1/2 Florida and Tenn, USA (old Missouri boy gone South)
Welcome to the Forum, Frank. I'm sure there will be a lot of people ready to help you with this. It would seem it depends somewhat on just how the Arthritis effects, which joints, etc. I have arthritis now in my finger joints of the left hand, and is causing some trouble, due to the bar being somewhat weighty; at this point can't play for long periods of time. The pad "wrist rest" as you call it, is a big help to me, but mostly for the right hand, not the left because the left hand has to move up and down the neck a lot. Some guys say it is not good playing posture or form to rest the wrists, anyway. Also, a light or hollow bar may be a help. Anyway some of the other guys probably can be of more help. Good luck and go for it
Mullen Lacquer SD 10, 3 & 5; Mullen Mica S 10 1/2 pad, 3 & 5; BJS Bars; LTD400, Nashville 112, DD-3, RV-3, Hilton VP . -- Gold Tone PBS sq neck; Wechter Scheerhorn sq neck. -- "Experience is the thing you have left when everything else is gone." -anon.-
-
- Posts: 7549
- Joined: 9 Jul 2005 12:01 am
- Location: Phenix City Alabama, USA
Welcome Frank,from Alabama,The guys are right a guitar with the arm rest would help,also if holding a bar in your left hand would be a problem,Chuck Brattain makes a bar with a ring on top to put your finger through to control the bar,go to the links here on the forum and you can find his link.Hope this helps and good luck,don't you know.
Hard headed, opinionated old geezer. BAMA CHARLIE. GOD BLESS AMERICA. ANIMAL RIGHTS ACTIVIST. SUPPORT LIVE MUSIC !
-
- Posts: 16
- Joined: 19 Sep 2007 12:21 pm
- Location: Connecticut, USA
- Contact:
Hey Frank. FWIW, there are several steelers here who are guitarists who took up steel for that very reason. There are also several steelers who are struggling to play steel because of carpal/arthritis kinds of stuff. So there's no one answer but steel playing is, for sure, easier on some of those body parts that can get messed up by git picking. There's a convention in Norwalk in November:
http://www.psga.org/
This doesn't tend to be a manufacturer's showcase event like some of the other conventions but I see that Jerry Fessenden will be there picking (and presumably with guitars to show?). Carter was there a few years ago.
It would be a good opportunity for you to breathe in some steel air and pick some brains. But here on the forum will do you just fine too as far as brain picking.
http://www.psga.org/
This doesn't tend to be a manufacturer's showcase event like some of the other conventions but I see that Jerry Fessenden will be there picking (and presumably with guitars to show?). Carter was there a few years ago.
It would be a good opportunity for you to breathe in some steel air and pick some brains. But here on the forum will do you just fine too as far as brain picking.
- Bob Hoffnar
- Posts: 9244
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- Contact:
-
- Posts: 16
- Joined: 19 Sep 2007 12:21 pm
- Location: Connecticut, USA
- Contact:
-
- Posts: 7549
- Joined: 9 Jul 2005 12:01 am
- Location: Phenix City Alabama, USA
Stan Paxton,Just noticed what you said about your left hand,the bar I told Frank about may help you.Just go to the links here to manf go to Brattain products,they have a picture on their site.May help you ,don't you know.
Hard headed, opinionated old geezer. BAMA CHARLIE. GOD BLESS AMERICA. ANIMAL RIGHTS ACTIVIST. SUPPORT LIVE MUSIC !
-
- Posts: 463
- Joined: 30 Apr 2005 12:01 am
- Location: Menifee, California, USA
- Contact:
-
- Posts: 16
- Joined: 19 Sep 2007 12:21 pm
- Location: Connecticut, USA
- Contact:
Here's that ring that was mentioned to all those who may need it:
http://www.rickalexander.com/BigSteel/C ... ngBar.html
http://www.rickalexander.com/BigSteel/C ... ngBar.html
-
- Posts: 16
- Joined: 19 Sep 2007 12:21 pm
- Location: Connecticut, USA
- Contact: