Hum?
Moderator: Michael Scott
Lana, whomsoever told you this, really "Hung You Out To Dry", it is so so wrong.
A rubber bridge over the cables wouldn't make one iota of difference to induced hum or hum from an earth loop.
Neither for that matter would ANY form of shielding, there WAS a small feeback loop from the transmision back to the desk, that is apparent by the constant "Phase Change" on the continuity announcer's microphone (Yours)
You even complained about the level, saying about being in a cave !!.
Maybe they were even taking a feed from the net for monitoring purposes and "Inadvertently" routed it back to one of the 'active' busses.
A rubber bridge over the cables wouldn't make one iota of difference to induced hum or hum from an earth loop.
Neither for that matter would ANY form of shielding, there WAS a small feeback loop from the transmision back to the desk, that is apparent by the constant "Phase Change" on the continuity announcer's microphone (Yours)
You even complained about the level, saying about being in a cave !!.
Maybe they were even taking a feed from the net for monitoring purposes and "Inadvertently" routed it back to one of the 'active' busses.
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
- Lana Rosselli
- Posts: 1647
- Joined: 29 Nov 2004 1:01 am
- Location: St. Louis, Missouri, USA
basilh, now that comment would have been far more beneficial than your previous comments. I thought it was our headphones that made me sound like I was in a cave. I know the engineers were recording on a lap top but not sure of their connection. That would have been something that I could have at posed as an issue. But with that said, in future remote broadcasts, I will keep that in mind.
I remembered from 2006 the issue we had with the base amp causing a hum. So that was the first thing I mentioned. And when the amp was muted (this year) the hum we heard went away. I was then told that amp had been isolated. We also had a problem with one player's guitar...
As for the 'ground loop' comment...that too was brought up - in exact terms.
I do have one question with regards to basil's last comment...if indeed this was the issue, would that have caused our headphones to cut in and out? I would - for lack of better terms - refer to this as a system overload. Equating it to too much on one circuit. So it may sound odd but I often need to find a similarity in order to understand new processes.
And by the way, I do commend you for your donation to Diabetes Research. I have held that cause close to my heart for many years. In fact, for the past four years organized Monsanto's corporate campaign (raising up to $75K) in addition to my own personal fundraising. Unfortunately I am not in a position to donate my personal year's earnings but have managed to collect close to $4K in donations per campaign. I tip my hat to you pence or penny!
All in all, thanks for the explanation.
I remembered from 2006 the issue we had with the base amp causing a hum. So that was the first thing I mentioned. And when the amp was muted (this year) the hum we heard went away. I was then told that amp had been isolated. We also had a problem with one player's guitar...
As for the 'ground loop' comment...that too was brought up - in exact terms.
I do have one question with regards to basil's last comment...if indeed this was the issue, would that have caused our headphones to cut in and out? I would - for lack of better terms - refer to this as a system overload. Equating it to too much on one circuit. So it may sound odd but I often need to find a similarity in order to understand new processes.
And by the way, I do commend you for your donation to Diabetes Research. I have held that cause close to my heart for many years. In fact, for the past four years organized Monsanto's corporate campaign (raising up to $75K) in addition to my own personal fundraising. Unfortunately I am not in a position to donate my personal year's earnings but have managed to collect close to $4K in donations per campaign. I tip my hat to you pence or penny!
All in all, thanks for the explanation.
Miss Lana
SteelRadio.com
SteelRadio.com
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
You're right Alan,
Lana, the headphone problem was PROBABLY twofold,
1. It was probably some form of feedback on the 'Cue" circuit that caused the cave effect and
2. The cutting out could have a myriad of causes, but in order of probability (In THIS particular instance) they would be, op amp cutting out because of mismatch caused by taking too many feeds from the 'phones output, faulty 'phones level potentiometers (Switchcleaner cures this) Faulty jack on the headphones cord, faulty connection where the cord connects to the earpieces, faulty routing switch for the aux sends or the headphone routing selector.
My guess would be the first instance.
As for the charity work, Last year Bob and I raised over £125k that's a quarter of a million Dollars.
Last weekend we were on a show with Daniel O'Donnel and the Fri. and Sat. nights raised over £25k for Daniel's Romanian Orphans Fund.
I've been a close friend of Daniels since he started in the music business, I produced his first hit record.
Daniel is, like Bob an MBE, they both got presented with their honours from the Queen of England for their services to charities, and in Bob's case, also for his BROADCASTING work
Lana, I would have responded sooner but I was at the studios layng down the tracks for a Charity show to be aired by the BBC from the Rico Arena, featuring Bob and myself, Daniel O'Donnell and many guests.
You may ask "where is Basil" on these posters, well , I'm Bob's musical director and his band on stage, as well as his record producer and general factotum, and as such only occasionally do I even dare to grace the posters, BUT, I did when we did our last annual Birmingham Symphony Hall Concert.
Lana, the headphone problem was PROBABLY twofold,
1. It was probably some form of feedback on the 'Cue" circuit that caused the cave effect and
2. The cutting out could have a myriad of causes, but in order of probability (In THIS particular instance) they would be, op amp cutting out because of mismatch caused by taking too many feeds from the 'phones output, faulty 'phones level potentiometers (Switchcleaner cures this) Faulty jack on the headphones cord, faulty connection where the cord connects to the earpieces, faulty routing switch for the aux sends or the headphone routing selector.
My guess would be the first instance.
As for the charity work, Last year Bob and I raised over £125k that's a quarter of a million Dollars.
Last weekend we were on a show with Daniel O'Donnel and the Fri. and Sat. nights raised over £25k for Daniel's Romanian Orphans Fund.
I've been a close friend of Daniels since he started in the music business, I produced his first hit record.
Daniel is, like Bob an MBE, they both got presented with their honours from the Queen of England for their services to charities, and in Bob's case, also for his BROADCASTING work
Lana, I would have responded sooner but I was at the studios layng down the tracks for a Charity show to be aired by the BBC from the Rico Arena, featuring Bob and myself, Daniel O'Donnell and many guests.
You may ask "where is Basil" on these posters, well , I'm Bob's musical director and his band on stage, as well as his record producer and general factotum, and as such only occasionally do I even dare to grace the posters, BUT, I did when we did our last annual Birmingham Symphony Hall Concert.
- Lana Rosselli
- Posts: 1647
- Joined: 29 Nov 2004 1:01 am
- Location: St. Louis, Missouri, USA
Thank you! With that I can eliminate a couple of possibles- narrowing the quest!!! I wonder if it would be possible to have a dedicated feed or find an alternative to feeding directly off the sound board. Of course doing that would require us to have our own sound board to get the mix correct - right?
Congrats!!! That had to be pretty cool getting an award from the Queen. But then again, seeing a kid finally get 'the pump' and being able to normalize their childhood somewhat is quite rewarding as well. In the four years I ran the corporate campaign, we raised $265K. Unfortunately my work load has caused me to step down as the campaign lead but not my participation. I hope some day soon elet transplants will be as common as penicillin!
Thanks again!
Congrats!!! That had to be pretty cool getting an award from the Queen. But then again, seeing a kid finally get 'the pump' and being able to normalize their childhood somewhat is quite rewarding as well. In the four years I ran the corporate campaign, we raised $265K. Unfortunately my work load has caused me to step down as the campaign lead but not my participation. I hope some day soon elet transplants will be as common as penicillin!
Thanks again!
Miss Lana
SteelRadio.com
SteelRadio.com
Lana, if you ran a RADIO link from the main auditorium soundboard, say via the headphone out to a dedicated 'in-ear monitor system, and then fed the output to your console, you would then eliminate all possibilities of a ground loop at YOUR end, then, any hum would be the responsibility of the PA crew ..and as a bonus you'd have the ability to listen to the main out via another in-ear receiver as well as monitoring your own desk out via conventional means.
BTW In-Ear systems are quite economically priced and you wouldn't need the top of the range "State of the Art" ones, most of the systems are pretty adequate for what I suggest.
You don't need to go tho the expense of molded earpieces, ordinary headphones will plug directly into the normal receivers.
Congrats on the $256K, you know that all we can do is help a little, BUT, a little here and a little there EVENTUALLY adds up to something substantial, our COMMON goal.
BTW In-Ear systems are quite economically priced and you wouldn't need the top of the range "State of the Art" ones, most of the systems are pretty adequate for what I suggest.
You don't need to go tho the expense of molded earpieces, ordinary headphones will plug directly into the normal receivers.
Congrats on the $256K, you know that all we can do is help a little, BUT, a little here and a little there EVENTUALLY adds up to something substantial, our COMMON goal.
- Bill Ferguson
- Posts: 5692
- Joined: 4 Aug 1998 11:00 pm
- Location: Milton, FL USA
- Contact:
To clarify the way the system was connected.
We were ALL on the same leg of the circuit.
We had no hum in the sound system.
We do hook up a separate mixer to feed audio to SteelRadio.com. This is my job and my equipment and it is the best money can buy.
Varying levels are exactly what comes off the stage. We cannot and will not attempt to set every level the same. Remember, we are mixing 24 channels of sound down to 2 channels while sitting in a "Live" room. You can only imagine how loud we have to run our headphones.
There was NO hum in my output to SteelRadio.com. The hum was picked up from something in the hotel. It was not present all the time. However it was still there when we disconnected our mixer from SteelRadio.com. We tried the grounding change to no avail.
The cables on the floor did not cause the hum. This is just something that was told to Lana in the heat of the moment.
The entire crew, including Lana, did a superb job for this broadcast.
We are constantly striving to improve the broadcast, but you have to understand no matter how good the equipment, we don't get to remix or in other words "no 2nd. chance".
I will put mine and my staff (all volunteers by the way" up against anyone.
I have CD's of the entire show (no hum from the same output) and they are GOOD.
Bill Ferguson
We were ALL on the same leg of the circuit.
We had no hum in the sound system.
We do hook up a separate mixer to feed audio to SteelRadio.com. This is my job and my equipment and it is the best money can buy.
Varying levels are exactly what comes off the stage. We cannot and will not attempt to set every level the same. Remember, we are mixing 24 channels of sound down to 2 channels while sitting in a "Live" room. You can only imagine how loud we have to run our headphones.
There was NO hum in my output to SteelRadio.com. The hum was picked up from something in the hotel. It was not present all the time. However it was still there when we disconnected our mixer from SteelRadio.com. We tried the grounding change to no avail.
The cables on the floor did not cause the hum. This is just something that was told to Lana in the heat of the moment.
The entire crew, including Lana, did a superb job for this broadcast.
We are constantly striving to improve the broadcast, but you have to understand no matter how good the equipment, we don't get to remix or in other words "no 2nd. chance".
I will put mine and my staff (all volunteers by the way" up against anyone.
I have CD's of the entire show (no hum from the same output) and they are GOOD.
Bill Ferguson
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter.
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
I agree completely with Doug's assessment - I could always hear some level of hum during quiet portions - during louder music it was masked, but if there was a momentary rest in a piece the hum would jump. It was always present, and you could also identify it with long sustained notes with weird oscillations - the hum waveform fighting the waveform of the note.
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
I just noticed - they sure let this thread die, didn't they?
I guess qualified advice isn't really desireable for some unknown reason.
I guess qualified advice isn't really desireable for some unknown reason.
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
The show is over. No point in trying to solve a problem that doesn't exist anymore. Next year when they set it up again the wiring will almost certainly be different.
Closed.
Closed.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video