The Steel Guitar Forum

Anyone have E9 tab for (some day soon)

Thank You
Bernie

Wanting to buy an arm rest with attachment for steel guitar.
Anyone know if it is possible to do this?

Any one have the E9 tab for Ghost riders in the Sky

Anybody have the E9 tab for "I love how you love me".
Great song by Curt Shoemaker.
thanks
Bernie

Thank you ERV
I can't wait until it is finished. My wife loves that song.

Bernie

Anyone have E9 TaB for "Wind Beneath my Wings"?
I would appreciate it very much.
Bernie

Any one have E9 TAB for "I love you so much"?
Thank you
Bernie

Any one have Rocky Top in E9 Tab?

Thanks
Bernie

It's gone. Not sure the exact spot but after the last lub it went away.
Thanks guys.
Bernie

OK Carl I removed the rod and worked the pull rod (the square bar) by hand and it still squeaked. I lubed the tuning knob of the low B string and that seemed to help. Still squeaks but not a bad. Maybe that will eventually go away. There is so much lub every where I guess I will have to play "t...

I checked the pedal as suggested but the sound seems to come from the top of the rod connected to the pedal immediately beneath the board. Or in that area. It is really hard to find it because the noise travels through the complete mechanism.
Thanks for the reply.
I'll keep trying.
Bernie

I have a GFI steel in E9. The a pedal sounds like a barn door. I have lubed every moving part that I can find and it didn't help. Any one have a suggestion?

I don't play in the barn.

Thanks
Bernie

I have a GFI E9 and some of the pedals squeak like a barn door as I play. Is there some kind of special lub I can use on it? This is the floor pedals and knee levers. I heard not to use WD 40. It really gets annoying.

Any help will be appreciated.
Thank you
Bernie

OK Bobby
I finally figured out what I was doing wrong. You said to start with the hex nuts backed off. I wasn't doing that so I couldn't get it. I backed all of them off and tuned the keys first except E everything is good to go.

Thank all of you for your help.

Bernie

Actually Jeff mine is red but it looks the same as the blue one.
Maybe I should get a hold of GFI. They might help like you said.

Happy New Year to you all.
Thanks Again
Bernie

OK Jeff I did it the way you said with the tuning keys first but after I tune the nylon tuners and go back and check the tone of the first tuning it is way off. All I do is keep chasing it from the tuning keys to the nylon keys and I can't tune it. It is the blue model. I would like to find someone ...

I appreciate the come back.
It is a GFI. Hope this helps. three pedal
Bernie

I would guess this has been on this forum before but I can't find it. Does anyone have the instructions for tuning the E9 strings, pedals, and knee levers? I have tried several times and I just can't get it. I don't understand how you can turn the knobs at each end of the same string and get two dif...

Are there any steel players around Port St Lucie Florida? I would like to meet someone and get some instruction.

Thanks
Bernie

Anyone have E9n tab for "Look at US)

Thanks
Bernie

I have a Korg tuner and it has several frequecies in the four hundred range. Can any one tell me which range I should tune my E9 in? I am really having a problem trying to tune this thing. I can't figure out how you can tune the same string at each end with two different knobs and not change the fir...

Donny I did what you said about laying on the floor and watching the rods. I guess if you were here you would slap me for what I found out. The noise seemed to be coming from the pedal itself so I discovered the bar or frame that the pedals are mounted to came loose from the right end and that is wh...

Yes I did sellect the complete song but it still went back to 1/4.

I guess I don't fully understand BIAB. Here is my problem. Apparently biab is written in 4/4 timing. If I want to change it to 3/4 timing I go to edit and go down to (set timing signature) click that and click the dot for 3/4 timing. There is no place to save the setting so it goes back to 1/4 timin...

I have been playing a short time but when I push the floor pedals down the rods slap against something. Is there a way to stop this noise???

Thanks
Bernie